UD pullies for V6?

Kim · Jun 9, 2005

GT/V6 grille

Awesome... now I understand. Thanks very much for your linkage Zodiac! You actually solved my entire dilemma regarding the V6/GT grille & bumper... I found a post by someone on the TMS board that has sucessfully put together a V6 grille with a GT bumper on a V6 '05! Now I just need to find that elusive redfire front bumper.

Looking forward to your results on Sat, MSP!

--=K

MSP · Jun 9, 2005

Zodiac, thats really nice work man!! So this GT grill to V6 seems to be a common upgrade I see.. How about the rear?

I think this is definatley an upgrade that needs to be done.. Nice pics Zodiac!!

Zodiac · Jun 9, 2005

MSP said:
Zodiac, thats really nice work man!! So this GT grill to V6 seems to be a common upgrade I see.. How about the rear?

I think this is definatley an upgrade that needs to be done.. Nice pics Zodiac!!

Haha thanks, I do what I can. Yeah, alot of people have interest in the grill, mainly for the fog lights. The rear fascia should link up with no trouble as far as I know.

Kim · Jun 16, 2005

MSP, or anyone else--

So, did we ever figure out if there's a way to adapt UD pullies to fit the V6?

Steve '05 · Jun 21, 2005

Sorry to go back to the fascia thing again but my dealer has told me that the mounting points for front & rear are different on the GT & V6.

Kim, any chance you could copy & paste that thread onto here to save us all searching it out?

Thanks,
Steve

Chris_NY · Jun 21, 2005

I hope thats not true about the rear bumper cover .. I am not sure it is though because there are a lot of ppl who change the rear cover on the V6 to the GT so they can have 2 exhaust ports. ..

That was my plan anyways .. so I hope thats not true

Kim · Jun 26, 2005

Steve--

Here's the thread on The Mustang Source where we last discussed mounting the GT front fascia on the V6:

http://forums.bradbarnett.net/index.php?showtopic=27178

Dineau and Tiberius1701 have sucessfully installed GT front bumpers on their V6's... and Tiberius' is with the stock V6 grille; he used twist ties and double sided foam tape to get the V6 grille to stay properly.

I tend not to trust much of what comes out of my dealer's mouth... unless I'm talking to a parts guy who knows what he's talking about, like Kevin C. I haven't had a chance to ask his opinion on the matter yet, but I will.

--=K

Steve '05 · Jun 28, 2005

Thanks Kim. The information I'd got was from one of the parts guys - nice guy but he didn't know the grille was a different size until I bought one & tried to fit it (hadn't discovered this forum at that point).

Steve

Katmandu · Aug 8, 2005

MSP said:
then the rotational charachteristics are too great to take a gamble.. Doubtfull...

What are you talking about..."rotational characteristics" ??

Katmandu · Aug 8, 2005

MSP said:
Which is how you know it will work.. Because the GT and the V6 use the same Alternator, Power Steering and WaterPump pulleys..

@Zodiac'
That sales rep is a moron!! Sorry man.. Once we get these installed, you and I will send him a nasty letter!!

Better check the bolt pattern/backspacing/width of that Crankshaft pulley compared to the GTs!!

Anyone know the specs on a 4.0 SOHC Crank pulley ??

Katmandu · Aug 8, 2005

MSP said:
I will find out why it wont work if it does not...

Ask yourself, how could it be that they wont work?

Uh, Bolt pattern spread, backspacing gap, pulley width..... Remeber here! The 4.6GT is NOT the same engine as the 4.0!

Katmandu · Aug 8, 2005

Kim said:
Actually I've emailed them a couple of times... I've never gotten a response yet. If anyone has an ongoing correspondence with the folks at Casco crash parts, can you ask them what the price would be for a GT front bumper w/ grille? --=K

I thought this thread was about UNDERDRIVE PULLIES ???

rygenstormlocke · Aug 13, 2005

Sorry to keep the GT bumper thing going, but I just did mine. They matched up fine, however I did have to get a bunch of new bolts and some other parts to do it. Went to Casco, emailing him was useless, so I simply called til he answered the phone. Got the complete kit and love it.

As for the UD pullies, I'm very keen to see how this one ends up.

UD pullies for V6?

Kim

New Member

MSP

Zodiac

New Member

Kim

New Member

Steve '05

New Member

Chris_NY

New Member

Kim

New Member

Steve '05

New Member

Katmandu

Katmandu

Katmandu

Katmandu

rygenstormlocke

former 10 second badass

Similar threads

UD pullies for V6?

New Member

MSP

New Member

New Member

New Member

New Member

New Member

New Member

former 10 second badass

Similar threads

Privacy & Transparency

Privacy & Transparency