undercar picture and side exhaust

65notch · Jul 28, 2005

does anybody have a picture of the underneith of a 65 coupe. i need a pretty straight shot of it, or as straight as possible. im trying to plan out an exhaust system that comes out infront of the rear wheels. and need to figure out where to put the bends and all.
anything will help guys. thanks

also, if anybody has this side exhaust setup on their car, it would be great to see a picture and info and how it was done. thanks

65ShelbyClone · Jul 28, 2005

You need to search first. There have been many threads covering this in the past and there is one down a few notches from this already.

MustangMatt1966 · Jul 29, 2005

look at the tread down from this one that is hot and talks about side exit exhaust, on the last page you will see a perfect undercar photo of dodgestangs car and the side exit exhaust he has...his car is sick

BobV · Jul 29, 2005

MustangMatt1966 said:
look at the tread down from this one that is hot and talks about side exit exhaust, on the last page you will see a perfect undercar photo of dodgestangs car and the side exit exhaust he has...his car is sick

That's NOT dodgestangs car in that picture - it's a photo he's hosting for "MyToys". Dodge's car is rear-exiting.

You also note that major, extensive floorpan rework is required to do side-exits that way.

Here's my twist on side-exits, mufflers (WLK-17676-$49/Summit) fit in stock location:

65notch · Jul 29, 2005

i read through that other thread after i posted this one. i should have searched prior. sorry bout that.

i found the dynomax mufflers on summit for 50 bucks, which is what i plan to get, but its how to route the outlets. im trying to stay away from to much of a bend.

BOBv...what degree is the bend on the outlet pips you have?

BobV said:
That's NOT dodgestangs car in that picture - it's a photo he's hosting for "MyToys". Dodge's car is rear-exiting.

You also note that major, extensive floorpan rework is required to do side-exits that way.

Here's my twist on side-exits, mufflers (WLK-17676-$49/Summit) fit in stock location:

Glen's 1965 5.0 · Jul 29, 2005

Underside

Here is my baby..

There are more pics on my web page under More Photos.

iskwezm · Jul 29, 2005

65notch said:
i found the dynomax mufflers on summit for 50 bucks, which is what i plan to get, but its how to route the outlets. im trying to stay away from to much of a bend.

BOBv...what degree is the bend on the outlet pips you have?

If your worried about the bends,have your shop or whoever is gonna do it use mandrel bent sections and weld it together,that what i did with mine.

65notch · Jul 30, 2005

iskwezm said:
If your worried about the bends,have your shop or whoever is gonna do it use mandrel bent sections and weld it together,that what i did with mine.

i was going to order mandrel bent tubing from summit and weld it together myself. but i gotta find out what degree bend i need with a in the front/ out the front muffler

65ShelbyClone · Jul 30, 2005

I just got my exhaust parts from Summit a week ago. I ordered two U-bends and that may have been one too many. I'm using glasspacks, though, so less tubing overall.

BobV · Jul 31, 2005

65notch said:
BOBv...what degree is the bend on the outlet pips you have?

I'm guessing it's 120*-135* - about like the bend a typical tailpipe has to make over the rear axle. If I were trying to piece it together using madrel-bent sections, I'd just get a 180* bend and trim backwards from there...

You'll like the Dynomax's - your ears will thank you for not going glasspack.

65notch · Aug 2, 2005

BobV said:
You'll like the Dynomax's - your ears will thank you for not going glasspack.

i have flowmaster 40 series right now and i like the sound. i dont want to be disipointed with anything that idecided to go with

BobV · Aug 2, 2005

If you want loud, Spintech makes their mufflers in a front in/out configuration - they're a lot more like the "flowmaster sound" than the Dynomax's.

undercar picture and side exhaust

65notch

New Member

65ShelbyClone

MustangMatt1966

New Member

BobV

65notch

New Member

Glen's 1965 5.0

iskwezm

65notch

New Member

65ShelbyClone

BobV

65notch

New Member

BobV

Similar threads

undercar picture and side exhaust

New Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency