• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Undercoating My Car

  • Thread starter Thread starter dbdragracing
  • Start date Start date Jul 2, 2006

dbdragracing

Member
Dec 1, 2004
397
2
18
Jul 2, 2006
#1
  • Jul 2, 2006
  • #1
I have a 1989 Mustang GT that Im going through hoping to make my dream Fox body. I have it gutted inside and was checking out the floor boards....it is solid as a rock except for one small place about 1inch x 1inch (where a door seal was leaking). Can I just cut this out a little bigger and patch it or should I do a whole floor pan? Also what type of metal would I need to patch it?

After I get the rust fixed I planned on taking a wire wheel and knocking off all the light surface rust under the car and undercoating it. What type of undercoating do you suggest? POR15? It is very hot here now and it should dry quick. I dont drive the car in the winter or rain. Should undercoating it keep it from rusting? Thanks.
 

Tonys96Cobra

professional deer "mounter"
Oct 28, 2005
19
9
29
Syracuse
Jul 2, 2006
#2
  • Jul 2, 2006
  • #2
Youll want to check out crazy petes thread on undercoating, wether or not you decide to go that route is up to you But he swears by it!
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Jul 2, 2006
#3
  • Jul 2, 2006
  • #3
For rust proofing i would go to a place like Krown or something like that.
http://www.krown.com/

I'm not quite sure what companies do this in the US but in Canada Krown is one of the top rustproofing places around.I get my car done every year for $99 and it helps ALOT.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Jul 2, 2006
#4
  • Jul 2, 2006
  • #4
Is Crazy Pete the dude who put all the grease up under his car? I would just like to patch the one small bad spot and spray some type of undercoating under it. Anyone have any suggestions? Thanks.
 

powertrax91

Founding Member
Mar 13, 2002
598
0
17
New York
Jul 2, 2006
#5
  • Jul 2, 2006
  • #5
for the best results you should treat the bottom of the car like the top.
sand, prime, seal and paint the areas that need attention
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jul 2, 2006
#6
  • Jul 2, 2006
  • #6
dbdragracing said:
Is Crazy Pete the dude who put all the grease up under his car? I would just like to patch the one small bad spot and spray some type of undercoating under it. Anyone have any suggestions? Thanks.
Click to expand...


crazypete lol that was a huge thread. Krown is really good stuff it has a creeping agent in it and moves into all the small places most undercoating can't.....I took mine to an Oil Gaurd and had a no drip syrayed on mine and I am verry happy with it.
 

Fox_84

New Member
Dec 28, 2005
143
0
0
Jul 3, 2006
#7
  • Jul 3, 2006
  • #7
I have just recently spent much attention to the underside of my car. I went to a local speedshop that primarily restores older model vettes. The guy that does all the body work there told me to use epoxy primer (black). It comes in several colors but black is most desirable for this application. He told me that it is the only paint that he has found that will stand up to almost anything. He has all the frames he does sent off to have them acid dipped. They are soaked in acid for 72 hours, then cleaned and sent back to him. He recently sent one off that he had done work on previously for a local car owner. He had previously replaced a cross-member on the frame of the car that had some decent rust eating away at it and after welding the steel in place, he sprayed it with the epoxy primer to keep it from rusting as it was fresh metal. When the owner of the car later decided he would have the car restored, he took it back to this same speedshop and when it came back from being acid dipped, the cross-member that was previously put in and sprayed, was still just as coated as the day it was sent off. I am also a believer because I have dripped brake fluid in a small spot since I sparyed my car and it did not even budge the primer at all. I know you are thinking primer for a final and only coat, but it works and looks great! It is a semi-flat finish just as you would suspect to see on the chassis of a car. If this is something you are interested in, I can tell you more and get you a number on the primer. Most may say it seems unreasonable, but it sure looks good and will last.
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Jul 3, 2006
#8
  • Jul 3, 2006
  • #8
I've heard a lot of good things about POR 15.

I need to get my car undercoated sometime as well.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Jul 3, 2006
#9
  • Jul 3, 2006
  • #9
Fox_84,

I would love more info on the epoxy primer. Did you apply it using a spray gun?

I would also like to hear some stuff about POR15. As far as the floorboards....can I just cut out the small area and patch it? What type of metal do I use? Thanks.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jul 3, 2006
#10
  • Jul 3, 2006
  • #10
por 15 and NEVER ever think about rust again...that product is like nothing I've ever seen for sealing and bonding to rough metal.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Jul 3, 2006
#11
  • Jul 3, 2006
  • #11
Where is a good place to get POR15 and how much would I need to undercoat my car? Thanks.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jul 3, 2006
#12
  • Jul 3, 2006
  • #12
contact local auto body supply shop for details, it's not cheap but if your wanting it done once and right then you need to check it out.
 
B

BullittAndy

New Member
Nov 9, 2003
139
0
0
Jul 3, 2006
#13
  • Jul 3, 2006
  • #13
If the rust patch is small and will not be visible (under carpet/ door sill etc.) then buy some epoxy resin and fiberglass cloth. A small hole will likely not be structural (there are all kinds of holes in the body) so you really only need to keep it from rusting further.
I used the above method on a football sized hole on a 55 Chevy floorpan and it was as strong/sound after 4 years as the first day. You just have to get all the rust off and clean it thoroughly with acetone for it to stick.
It also sounds like you might benefit from a sound deadening material in addition to the other work.
 

Fox_84

New Member
Dec 28, 2005
143
0
0
Jul 3, 2006
#14
  • Jul 3, 2006
  • #14
I tried POR-15 on my rear-end and I preped that thing like noone's business. I hated it. The paint itself is nice but it turns green and when you use the topcoat to keep it from turning green, that chassisblack is CRAP!!! you might do that then topcoat with something else, but their topcoats are weak.

As for the epoxy primer, it is not cheap AT ALL!!!
For 1 quart and the catalyst for it, you will spend 80-$100.
The primer is PPG dp90
The catalyst is dp401lf
And yes I sprayed them through a automotive spary gun on a air compressor.

Some people like POR-15 but prep is critical

The epoxy primer I guarantee you will only need a good hosing down with a non oil based engine degreaser, a little scrubbing in thick grease areas and just get it down to the original paint surface, not down to metal bullcrap.
This stuff sticks GREAT!
 
You must log in or register to reply here.

Similar threads

Paint and Body What kind of primer for bare metal rust repair?
  • AnthonyA1234
  • May 24, 2024
  • Fox 5.0 Mustang Tech
Replies
9
Views
1K
Fox 5.0 Mustang Tech May 24, 2024
General karthief
D
Paint and Body How bad is this undercarriage rust?
  • dqureshi06
  • Dec 12, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
733
Fox 5.0 Mustang Tech Dec 15, 2024
Rcdgl
R
S
I don know what im doing!
  • Sha_lala_pookie
  • May 5, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
11
Views
761
1965 - 1973 Classic Mustangs -General/Talk- May 11, 2025
Sha_lala_pookie
S
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
R
Starting my 1979 notch build
  • redneck15431
  • Dec 28, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
726
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2025
redneck15431
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?