• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Unique A/c Problem

  • Thread starter Thread starter michaelh4
  • Start date Start date Jul 21, 2012
M

michaelh4

New Member
Apr 29, 2012
4
0
1
Jul 21, 2012
#1
  • Jul 21, 2012
  • #1
I got a '01 V6 automatic. The AC works fine, blows cold, but when i'm driving and i press the accelerator about 50% or more, all the air stops blowing out of the vents. This only happens going down the road; i tried to replicate it sitting in park but it blows continuously, so only in drive.
If i left off the pedal, cold air immediately begins blowing again and there is no temp change in the air; always cold. Also, I can't hear any clicking turning the blower fan on/off.
It's just not making sense that at a certain point on the accelerator, the fan stops blowing.
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jul 22, 2012
#2
  • Jul 22, 2012
  • #2
Engine vacuum is used to control the vent damper motors. There is a check value and a vacuum reservoir that keeps the system working at times when the engine vacuum is low.

In your case, either there is a vacuum leak after the check valve or the check value isn't working. When the engine vacuum drops, there's not enough vacuum to "hold" the dampers in the vent position. The damper spring then switches to the default position which is the defrost setting.
 
M

michaelh4

New Member
Apr 29, 2012
4
0
1
Jul 26, 2012
#3
  • Jul 26, 2012
  • #3
so where exactly is the check valve on my car; I've looked on the passenger side of the engine bay up near the firewall, but I can't seem to see it, am I just missing the obvious here?
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jul 26, 2012
#4
  • Jul 26, 2012
  • #4
It's in the passenger compartment. This could also be leaks in the vacuum lines.

Do you have a Ford service manual? If interested in getting a copy for yourself I may be able to help. PM if interested.
 
M

michaelh4

New Member
Apr 29, 2012
4
0
1
Jul 31, 2012
#5
  • Jul 31, 2012
  • #5
ok I need a little more detail, the haynes manual i have doesn't say anything about the passenger compartment and i've checked all the vacuum lines under the hood, where am I specifically looking?
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Jul 31, 2012
#6
  • Jul 31, 2012
  • #6
There is very small vacuum line that passes through the firewall on the right hand side.

The Ford service manuals have more details.
 
M

michaelh4

New Member
Apr 29, 2012
4
0
1
Aug 26, 2012
#7
  • Aug 26, 2012
  • #7
Ok so i took a flashlight and looked at the firewall. Is it the A/C line that goes into the firewall that you're talking about or am I just missing it? And could it be a vaccuum line on the A/C(there's a rubber hose line along the valve cover on the passengers side)? I haven't located the vaccuum reservoir either.
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Aug 27, 2012
#8
  • Aug 27, 2012
  • #8
Post a picture of the right side of the firewall from the engine bay side. Hint, a vacuum line is not the same as the hard AC line.
 

Ufg062003

New Member
Jun 28, 2012
29
2
4
Georgia
Aug 28, 2012
#9
  • Aug 28, 2012
  • #9
Control head is controlled by vacuum also there will be red blue yellow and so on lines goin to it so test it ,default mode is defrost when there is a vacuum leak most of the time it's a broke line under the hood or the control head
 
You must log in or register to reply here.

Similar threads

B
A/C Issues
  • Boats90GT
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
127
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Mcmahst
9
1998 V6 - What is this line called?
  • 98_Stanger
  • Aug 10, 2025
  • SN95 V6 Mustang Tech
Replies
5
Views
307
SN95 V6 Mustang Tech Aug 10, 2025
nickyb
J
V-6 thermostatically controlled cooling fan - on when cold - new behaviour
  • jacekk
  • Oct 1, 2025
  • 2005 - 2014 Specific V6 Tech
Replies
0
Views
192
2005 - 2014 Specific V6 Tech Oct 1, 2025
jacekk
J
G
1991 GT 5.0 running hot
  • gvanginkel403
  • Jul 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
175
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2026
General karthief
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
182
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?