Ok so I thought everything was going great. Just need to attach all the headlight/taillight/reverse light pigtails and I will be done...WRONG. Electric fuel pump power wire has no power... any ideas? It doesnt have power in acc, on or start. What am I doing wrong?
no one yet.... Well I started thinking.... is that just a signal wire and it needs a relay to be put in?? I figure if its a signal wire, it still needs power running through it to give signal..
You could be right about the signal bit but it would still be hot, ofg course if it did not carry enough current it could have popped a fuse, is there any current at all? Does that circuit have power to the fuse?
You could be right about the signal bit but it would still be hot, ofg course if it did not carry enough current it could have popped a fuse, is there any current at all? Does that circuit have power to the fuse?
its an EZ21 harness.... I have used one in the past and had no problems... this one is starting to piss me off. Im rechecking all my connections, but its looking like a cold fuse socket.