Well, since I last posted.. I have taken out the motor, had it cleaned, honed to 306 cu at a machine shop and pretty much 50-60% done rebuiilding the motor to how I like. I've pretty much decided on my intake, which is going to be Holley Systemax II or a Edelbrock RPM Performer II, both seem to give me the type of ass hauling power I need...
I got TWO questions:
What size AFR heads and how much? Note: I know the sizes are 185, 205 and 225cc.. which is the biggest I can slap in the 306 motor?
What type of camshaft?
I want the most power I can get from these two components, as I believe their relatively important. I do plan on adding force induction down the road with a NOVI 2000.. and lastly I really would not want to have a rough idle.. but I'll take it if it gives me more power.
I got TWO questions:
What size AFR heads and how much? Note: I know the sizes are 185, 205 and 225cc.. which is the biggest I can slap in the 306 motor?
What type of camshaft?
I want the most power I can get from these two components, as I believe their relatively important. I do plan on adding force induction down the road with a NOVI 2000.. and lastly I really would not want to have a rough idle.. but I'll take it if it gives me more power.