upper intake vac lines

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 6, 2008

#1

• Jun 6, 2008

• #1

i need some help i dont remember exactly how they went im and idiot for not marking them a diaghram would help alot

 

SN95StangMan

New Member

Jul 5, 2003

1,292

0

0

Lynwood, CA

Jun 6, 2008

#2

• Jun 6, 2008

• #2

Here's a quick pic



There's another line that comes from the left side of the engine compartment, through the canister and hooks up to the other nipple you see there with no line

 

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 6, 2008

#3

• Jun 6, 2008

• #3

what is the pcv

 

SN95StangMan

New Member

Jul 5, 2003

1,292

0

0

Lynwood, CA

Jun 6, 2008

#4

• Jun 6, 2008

• #4

5.0H.O said:

what is the pcv

Click to expand...

It's little plastic check valve that is sticking out of the back of the lower intake that has a vacum line attached to it. ill get a pic in a few minutes

looks like this, but with a bend on that vacum line to go towards the fitting in the first picture

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Jun 6, 2008

#5

• Jun 6, 2008

• #5

stock intake....

The red & green feed the EGR and one the nipple. the small hose sticking up feeds your FPR. The one out front feeds the purge soleniod on the firewall.

 

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 8, 2008

#6

• Jun 8, 2008

• #6

what else hooks up to the front nipples

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Jun 8, 2008

#7

• Jun 8, 2008

• #7

5.0H.O said:

what else hooks up to the front nipples

Click to expand...

The big connector takes a 3/8 hose or so...it feeds to the vac tree on the drivers side inner fender... Your upper is the bottom line feeding this tree.
Been years since I had a stock intake...your talking a stock intake, correct??

 

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 8, 2008

#8

• Jun 8, 2008

• #8

yes and what about the the other small nipple

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Jun 8, 2008

#9

• Jun 8, 2008

• #9

I'm assuming your talking this one?? one is Red or Grn feed..the other takes a small feed to your FPR...

 

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 8, 2008

#10

• Jun 8, 2008

• #10

yes so do i just block one of them

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Jun 8, 2008

#11

• Jun 8, 2008

• #11

Correct........ You'll feed your FPR and plug the other...

Napa sells those caps to block em off....small pack with all sizes for a few dinero..

 

5

5.0H.O

New Member

Apr 10, 2008

25

0

0

b'ham, AL

Jun 8, 2008

#12

• Jun 8, 2008

• #12

thanks rio last finishing touches will be done in a couple of weeks i will post picks of my rebuild and let everyone check out my freshly clean and uncluttered engine bay