Upper is off once again,,,,,,,Systemax help

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 19, 2007

#1

• Apr 19, 2007

• #1

I've done the two spacer thing. (1) 1" and (1) 1/4" (to clear valve covers)

I've done the stock valve covers/no spacer thing (not much difference)

I've now got the stock valve covers/1" spacer thing going on.

John, I know you say a little oil is fine, but tell me Im not sucking to much. Look at that spacer,,,it's soaked. Like we discussed,,only 8" of vacuum as well. If I put the stock cap on the filler next and leave the PCV bung capped it makes a whistle that is a little loud. As Im untightening the cap you can hear it sucking. I replaced the cap for a breather for now. Once I get a vacuum tit for the PCV port on TB I will go back to original cap. I really wish I would have kept my B cam.

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Apr 19, 2007

#2

• Apr 19, 2007

• #2

if all of that is oil then your right it's way to much.

 

302RollinHard

New Member

Sep 26, 2005

0

0

0

Columbus, OH

Apr 19, 2007

#3

• Apr 19, 2007

• #3

Wade,
usually that on the throttle body is connected to the oil fill neck on the valve cover (as I am sure you know). That could give you a little less oil sucked into your intake. (it acts like a HUGE PCV valve, kinda). Do you have the oil fill neck tube in place? Looks like it is capped on the engine. I would try advancing the cam I know that would suck at this point to pick up some bottom end.
It sounds to me like with 8" of vacuum you have a vacuum leak somewhere. I am fighting the same problem I only have 5" of vacuum.

 

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 19, 2007

#4

• Apr 19, 2007

• #4

Yeah, I have the stock hose that actually goes to the PCV tit on the TB. I will go get a replacement or just go get some sort of vacuum bung that can thread into it. I am pretty sure that will take care of some of the problem. I know I installed the cam "straight up" and Im not pulling the motor apart just to advance/retard the thing. The 8" of vacuum thing has me thinking I might not have the lower sealed all the way. I'll keep ya all posted.

 

88mouse

New Member

Apr 18, 2007

630

0

0

Mooresville nc

Apr 19, 2007

#5

• Apr 19, 2007

• #5

what all do you have done to the motor? My buddy has a 347 with a systemax that is sucking oil back up like that, we haven't been able to figure it out yet.

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Apr 19, 2007

#6

• Apr 19, 2007

• #6

sorry...and i know it's off the subject.
but didn't you post awhile back about cleaning up your engine, so what's with all those stickers.


back to your problem.........

 

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 19, 2007

#7

• Apr 19, 2007

• #7

4G-KDMP said:

sorry...and i know it's off the subject.
but didn't you post awhile back about cleaning up your engine, so what's with all those stickers.


back to your problem.........

Click to expand...

Guys in my club gave me hell about stickers on the outside of the car so I had to at least put some little ones on there.

 

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 19, 2007

#8

• Apr 19, 2007

• #8

88mouse said:

what all do you have done to the motor? My buddy has a 347 with a systemax that is sucking oil back up like that, we haven't been able to figure it out yet.

Click to expand...

Stock 90 GT40 crate motor from ford. Has approx. 50k miles on the motor itself.

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Apr 19, 2007

#9

• Apr 19, 2007

• #9

Wade95 said:

Guys in my club gave me hell about stickers on the outside of the car so I had to at least put some little ones on there.

Click to expand...

i'm a firm believer in why advertise for someone unless kicken in a few $ on your project, or is that the case?

 

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 19, 2007

#10

• Apr 19, 2007

• #10

I think your theory is a good one. I just like a few stickers.

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Apr 19, 2007

#11

• Apr 19, 2007

• #11

i wasn't trying to take away from your thread, i was just curious.


ttt

 

W

Wade95

New Member

Oct 5, 2002

19

0

0

TarponSprings,FL

Apr 20, 2007

#12

• Apr 20, 2007

• #12

Haaaaaaaa, no sweat brother,,all in good fun.