UPR Power Pipe, how does it install!!!!

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Apr 3, 2004

#1

• Apr 3, 2004

• #1

I just got a vortech, and I was told that the power pipe it came with was from UPR, but I don't see it on thier site, it's made out of plastic if that helps...It's about 4" I haven't measured it, but it's HUGE, and won't fit through the hole int he fender wall, that most usualy do.....I can't figure out how the heck it installs...I also have Mass Air so the sensor has to go in there somewhere too.

Here is a picture of it. If anyone can tell me how it installs that would be great.

 

D

DropTopR

New Member

Mar 25, 2004

175

0

0

Warsaw IN

Apr 4, 2004

#2

• Apr 4, 2004

• #2

You still feed it through the same hole, but you have to cut or beat the hole larger. A friend of mine bought a power pipe, and we had to "massage" the hole with the Ford tool. Then the mass air went inside the fender well. Happy hammering.

 

JadeFalcon

Founding Member

Mar 28, 2002

1,924

0

0

Arlington, TX

Apr 4, 2004

#3

• Apr 4, 2004

• #3

hey where did you get those bed sheets?

 

BlackFox5.0

Founding Member

Aug 7, 2000

3,514

1

0

Massachusetts

Apr 4, 2004

#4

• Apr 4, 2004

• #4

Mustangs Unlimited, I don't know if they still have them, but it's just a comformter. I got it like 5 years ago.

When I put the 90* elbow on the blower, it hits the schrader valve, how can i get around this? I tried bending the line backward, that helped, but not that much, I don't want to snap off the line....

 

Bone Racing

New Member

Sep 7, 2003

1,075

0

0

Long Island, NY

Apr 4, 2004

#5

• Apr 4, 2004

• #5

take the line off...and put it back later?

 

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

Apr 4, 2004

#6

• Apr 4, 2004

• #6

DropTopR said:

You still feed it through the same hole, but you have to cut or beat the hole larger. A friend of mine bought a power pipe, and we had to "massage" the hole with the Ford tool. Then the mass air went inside the fender well. Happy hammering.

Click to expand...

.......the Ford tool.

thats pretty good. I just call it the persuader.