Does anyone have the Prothane front control arm bushings that MM sells?
I've read that you need to trim the bushing so that it is slightly smaller than the metal insert. This way, the bushing doesn't get squished and bind up when you tighten everything down. So the mounting point contacts the metal sleeve before the urethane bushing..
This is where I'm getting this information from:
http://home.flash.net/~ivc1/cobra/frtpoly.html
Anyone do this before?
Riley
I've read that you need to trim the bushing so that it is slightly smaller than the metal insert. This way, the bushing doesn't get squished and bind up when you tighten everything down. So the mounting point contacts the metal sleeve before the urethane bushing..
This is where I'm getting this information from:
http://home.flash.net/~ivc1/cobra/frtpoly.html
Anyone do this before?
Riley
