• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

using 351 headers on 302. on an 89

  • Thread starter Thread starter dastang2
  • Start date Start date Jan 20, 2006

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Jan 20, 2006
#1
  • Jan 20, 2006
  • #1
since i can't find any answers using search i will ask here. i have some 351 swap headers and want to know if i can use them on a 302 for now
one is on and the other hits the starter. i have an adjustable starter and have not tried to adjust it yet if the block will let me but i want to see if it has been done. they are equal length shorties.
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Jan 20, 2006
#2
  • Jan 20, 2006
  • #2
does anybody know this
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 21, 2006
#3
  • Jan 21, 2006
  • #3
Interesting question.

Sorry I don't have a simple yes/no answer for you.

If you do get sufficient clearance with the starter, the other likely issue is getting the headers to mate up with the midpipe. You may have to pull the midpipes inboard to get it bolted together.

The stock starter could be replaced with a small diameter starter. Powermaster makes one, and I am sure there are others out there.

Good Luck
jason
 

89CobraGT

New Member
Dec 14, 2005
113
0
0
Winnipeg manitoba
Jan 21, 2006
#4
  • Jan 21, 2006
  • #4
Bump
 

90NotchBack

New Member
Feb 15, 2004
306
2
0
Loxahatchee/Pembroke Pines, FL
Jan 21, 2006
#5
  • Jan 21, 2006
  • #5
I've put Heddman 351W Long tube headers 1 3/4 and stuck them on a 302. They fit but hang really low and rubbed on every speed bump.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 21, 2006
#6
  • Jan 21, 2006
  • #6
yah they would work except for the fact they would be low. the only real difference between 302's and 351w's is abot 1.3 inches. so the 351w swap headers will be 1 and 3/10 of a inch to high. if that makes sence to yah.
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Jan 21, 2006
#7
  • Jan 21, 2006
  • #7
the starter i have is a small adjustable one and the block will not allow me to adjust it any further. the header will nut sit flush with the head so i think i will have a muffler shop heat it up and bend the header out a little.
 

90NotchBack

New Member
Feb 15, 2004
306
2
0
Loxahatchee/Pembroke Pines, FL
Jan 21, 2006
#8
  • Jan 21, 2006
  • #8
I've found out that 302 headers don't fit 351W
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 21, 2006
#9
  • Jan 21, 2006
  • #9
dastang2 said:
since i can't find any answers using search i will ask here. i have some 351 swap headers and want to know if i can use them on a 302 for now
one is on and the other hits the starter. i have an adjustable starter and have not tried to adjust it yet if the block will let me but i want to see if it has been done. they are equal length shorties.
Click to expand...

Who makes these equal length shorty 351w swap headers?
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Jan 21, 2006
#10
  • Jan 21, 2006
  • #10
i got them used for 65 bucks but i believe the man said they were motorsports or they were shipped in a motorsports box so who knows. i really think if the tubes were heated up and the header was pryed with a bar it would bend away from the starter. i found a stock mini starter from my old tbird and it looks like it will work with these headers. if it fits i may sell the hi torque mini starter i have.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
510
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
T
Need help with 302 swap
  • thxmxrgx
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
280
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 24, 2026
thxmxrgx
T
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
522
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
R
Microsquirt tune for stroked 351W in a foxbody
  • roldy
  • Jul 26, 2026
  • Digital Self-tuning Forum
Replies
7
Views
424
Digital Self-tuning Forum Oct 25, 2026
roldy
R
J
can you use the heads off a H O 302 to put on a regular 302 engine
  • Jan H
  • Feb 25, 2026
  • Other Auto Tech
Replies
6
Views
604
Other Auto Tech May 17, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?