• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Using a EFI starter on a Carb'd car

  • Thread starter Thread starter Busted07
  • Start date Start date Jul 3, 2007

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jul 3, 2007
#1
  • Jul 3, 2007
  • #1
Im using a stock EFI starter on a car that i have converted to carb. My question to you guys that have done this is.....

how the hell did you do it?

Im thinking that the stock harness wont work right, and like everything else on the damn car, ill have to modify something.

I took this car apart 4 years ago, and i dont remember what stud on the starter does what. does anyone know if i can just run a hot (+) wire to it ? do i have to have a ground on it?


HELP!
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 3, 2007
#2
  • Jul 3, 2007
  • #2
????

What kind of starter do you have? Isn't it just a big (+) wire... then all you need is a good engine ground.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 3, 2007
#3
  • Jul 3, 2007
  • #3
Yep - the starter interlock circuit is academic. Leave it roughly as it is and you should be good.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jul 3, 2007
#4
  • Jul 3, 2007
  • #4
ok, i thought that when it was EFI, there was a harness or something that had several connectors that went to the back.

so slap a positive wire (cable) from the solenoid to the starter, a few engine grounds and i should be cool, right?

And Hissin, youll have to use smaller words, i was up till 12:15 last night working on this car, and my brain is mush right now lol
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jul 3, 2007
#5
  • Jul 3, 2007
  • #5
it doesnt have a ground wire. it grounds itself out through the housing.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jul 3, 2007
#6
  • Jul 3, 2007
  • #6
BK_CAULEY said:
it doesnt have a ground wire. it grounds itself out through the housing.
Click to expand...


Werd.... thanks peoples!
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 3, 2007
#7
  • Jul 3, 2007
  • #7
Ok use the dispersion-strengthened hafnium excelinide terminals and connect them to the particle excellerator. Make sure that the starter is full of Deuterium/Tritium mix. MAKE SURE there's no power drain into the main particle impeller which will cause the internal confinement fields to be lost, flooding the engine bay with radiation. Oh and connect the shield systems which are composed of highly focused spatial distortions which contain an energetic graviton field which will help prevent any road dirt to get into the starter...


 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Jul 3, 2007
#8
  • Jul 3, 2007
  • #8
Boss 351 said:
Ok use the dispersion-strengthened hafnium excelinide terminals and connect them to the particle excellerator. Make sure that the starter is full of Deuterium/Tritium mix. MAKE SURE there's no power drain into the main particle impeller which will cause the internal confinement fields to be lost, flooding the engine bay with radiation. Oh and connect the shield systems which are composed of highly focused spatial distortions which contain an energetic graviton field which will help prevent any road dirt to get into the starter...


Click to expand...



I have friends just like you... those friends are the reason i drink so much
 
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
600
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Fox Traction control
  • Sparky714
  • Nov 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
358
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sunday at 9:49 AM
nicholase
Electrical 88 EEC Injectors batch firing ?
  • Dustin 86GT
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
660
Fox 5.0 Mustang Tech Jan 8, 2026
gkomo
Big Posi and Neg wire from Starter to Battery and Alt wires..........
  • from6to8
  • Feb 9, 2026
  • 1994 - 1995 Specific Tech
Replies
1
Views
314
1994 - 1995 Specific Tech Feb 9, 2026
AeroCoupe
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
688
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?