• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

V-8 conversion probs

  • Thread starter Thread starter 2_fast_4_ya
  • Start date Start date Sep 12, 2005
2

2_fast_4_ya

New Member
Dec 5, 2004
11
0
0
norhtwest ark
Sep 12, 2005
#1
  • Sep 12, 2005
  • #1
Hey guys i have a 87 notch and i am putting a drivetrain out of a 90 mass air car. i have now realized that the engine harness will not plug into the dash harness that comes out on the drivers side. i heard the u can repin the plugs or would it be easier to find a dash harness out of a v-8 car.thanks
adam
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Sep 12, 2005
#2
  • Sep 12, 2005
  • #2
2_fast_4_ya said:
Hey guys i have a 87 notch and i am putting a drivetrain out of a 90 mass air car. i have now realized that the engine harness will not plug into the dash harness that comes out on the drivers side. i heard the u can repin the plugs or would it be easier to find a dash harness out of a v-8 car.thanks
adam
Click to expand...

Sounds like you have a 4 cylinder '87? In 1990 the drivers side airbag made it's appearence and the dash wiring and layout changed a little to accomidate that change.

The engine harness should connect to the harness for the '90 Computer. What are you tryign to accomplish? Your post is a little confusing to me, and maybe others.
 
2

2_fast_4_ya

New Member
Dec 5, 2004
11
0
0
norhtwest ark
Sep 12, 2005
#3
  • Sep 12, 2005
  • #3
the engine harness does plug in to the computer where it goes through the firewall on the pass side. my problem is where the dash harness comes through the firewall on the drivers side where there are 2 grey and black plugs. engine harness only has 1 plug. i think these plugs are where your gauges and and your ignition feeds come into the instrument cluster.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Sep 12, 2005
#4
  • Sep 12, 2005
  • #4
2_fast_4_ya said:
the engine harness does plug in to the computer where it goes through the firewall on the pass side. my problem is where the dash harness comes through the firewall on the drivers side where there are 2 grey and black plugs. engine harness only has 1 plug. i think these plugs are where your gauges and and your ignition feeds come into the instrument cluster.
Click to expand...


Ohhhhhh... ok I'm on the same page now.

That's a good question, not one I remember seeing here before. Someone must know the answer. There must be an easy fix. This swap has been done many times. Do you have the wiring diagrams for both harnesses to attempt the pin swap?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 12, 2005
#5
  • Sep 12, 2005
  • #5
Copied From bbunt302

Just for reference, here's a list of all the compatible years:

89 harness should work for 86-89 as long as you're using mass air.
90 harness will only work in a 90. (B/c of air bags and dual dash connectors)
91 through early 92 harnesses should be compatible (single dash connector, fuel pump relay under driver's seat)
Late 92 through 93 harnesses should be compatible (single dash connector, fuel pump relay under the hood)

Computers from 89-92 are all the same. Look for the A9L sticker on the back cover for a 5 speed that matches your requirements. Example: E9ZF 12A650 AA" with the A9L code.
 
2

2_fast_4_ya

New Member
Dec 5, 2004
11
0
0
norhtwest ark
Sep 13, 2005
#6
  • Sep 13, 2005
  • #6
thanks for all the help, i knew this but i didnt think about it. so what do you guys think is the best way to go about fixing it.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Sep 13, 2005
#7
  • Sep 13, 2005
  • #7
I'd say it's easier to get ahold of an 88/89 mass air harness (88 cali) and swap that out than to pull your dash and swap in a 90 harness, which probably won't work with your 87 dash and non air bag style anyhow. Just get the right engine harness and sell yours to someone else who needs it.
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Sep 13, 2005
#8
  • Sep 13, 2005
  • #8
You can also use an 87-88 speed density engine hanress and use the mass air wire kit found on ebay for about $40. But like stated above the easier way would to use an 89 harness.
 
You must log in or register to reply here.

Similar threads

Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
998
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
838
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
685
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
B
Electrical Fuse 8, Light Green / Black Wire
  • bleedinggreen
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
582
Fox 5.0 Mustang Tech Jun 26, 2025
bleedinggreen
B
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
475
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?