V-8 conversion probs

Hey guys i have a 87 notch and i am putting a drivetrain out of a 90 mass air car. i have now realized that the engine harness will not plug into the dash harness that comes out on the drivers side. i heard the u can repin the plugs or would it be easier to find a dash harness out of a v-8 car.thanks
adam
 
2_fast_4_ya said:
Hey guys i have a 87 notch and i am putting a drivetrain out of a 90 mass air car. i have now realized that the engine harness will not plug into the dash harness that comes out on the drivers side. i heard the u can repin the plugs or would it be easier to find a dash harness out of a v-8 car.thanks
adam

Sounds like you have a 4 cylinder '87? In 1990 the drivers side airbag made it's appearence and the dash wiring and layout changed a little to accomidate that change.

The engine harness should connect to the harness for the '90 Computer. What are you tryign to accomplish? Your post is a little confusing to me, and maybe others.
 
the engine harness does plug in to the computer where it goes through the firewall on the pass side. my problem is where the dash harness comes through the firewall on the drivers side where there are 2 grey and black plugs. engine harness only has 1 plug. i think these plugs are where your gauges and and your ignition feeds come into the instrument cluster.
 
2_fast_4_ya said:
the engine harness does plug in to the computer where it goes through the firewall on the pass side. my problem is where the dash harness comes through the firewall on the drivers side where there are 2 grey and black plugs. engine harness only has 1 plug. i think these plugs are where your gauges and and your ignition feeds come into the instrument cluster.


Ohhhhhh... ok I'm on the same page now. :nice:

That's a good question, not one I remember seeing here before. Someone must know the answer. There must be an easy fix. This swap has been done many times. Do you have the wiring diagrams for both harnesses to attempt the pin swap?
 
Copied From bbunt302

Just for reference, here's a list of all the compatible years:

89 harness should work for 86-89 as long as you're using mass air.
90 harness will only work in a 90. (B/c of air bags and dual dash connectors)
91 through early 92 harnesses should be compatible (single dash connector, fuel pump relay under driver's seat)
Late 92 through 93 harnesses should be compatible (single dash connector, fuel pump relay under the hood)

Computers from 89-92 are all the same. Look for the A9L sticker on the back cover for a 5 speed that matches your requirements. Example: E9ZF 12A650 AA" with the A9L code.
 
I'd say it's easier to get ahold of an 88/89 mass air harness (88 cali) and swap that out than to pull your dash and swap in a 90 harness, which probably won't work with your 87 dash and non air bag style anyhow. Just get the right engine harness and sell yours to someone else who needs it.