mr_woodster Active Member Jul 28, 2003 1,314 0 36 Riverside, CA Jul 25, 2008 #1 Jul 25, 2008 #1 I acquired a 1995 mustang v6 t5 transmission. I was wondering what the differences are between this and its v8 variant?
I acquired a 1995 mustang v6 t5 transmission. I was wondering what the differences are between this and its v8 variant?
T techdbw New Member Apr 10, 2004 35 0 0 Jul 28, 2008 #2 Jul 28, 2008 #2 As far as I know there is no difference between 5.0 and 3.8 but you might want to check this link. Should explain it all FORDMUSCLE.com webmagazine - T5 Swap for Early Fords!
As far as I know there is no difference between 5.0 and 3.8 but you might want to check this link. Should explain it all FORDMUSCLE.com webmagazine - T5 Swap for Early Fords!
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,255 17,939 224 Massachusetts Jul 28, 2008 #3 Jul 28, 2008 #3 Between a Fox t-5 and the SN95 t-5, the inputer shaft is longer. You either need sto replace the input shaft AND bearing retainer with Fox peices, or use the SN95 bellhousing. I beleive the 1996-later V6 T-5's were equal in strenght to the V8 fox t-5's. Unsure whatthe 1995 is rated at though
Between a Fox t-5 and the SN95 t-5, the inputer shaft is longer. You either need sto replace the input shaft AND bearing retainer with Fox peices, or use the SN95 bellhousing. I beleive the 1996-later V6 T-5's were equal in strenght to the V8 fox t-5's. Unsure whatthe 1995 is rated at though
jrichker StangNet's favorite TOOL In Remembrance. Thank you for your contributions Mar 10, 2000 27,512 2,813 234 Dublin GA Jul 28, 2008 #4 Jul 28, 2008 #4 Please note that the T5 input shafts on all 94 and later cars is about 3/4" longer that the input shafts of the T5's made before 94.
Please note that the T5 input shafts on all 94 and later cars is about 3/4" longer that the input shafts of the T5's made before 94.