Vaccum Problems...

[Piston]

Does anyone have a vaccum diagram for a 94/95 stanger. Just dropped in a new motor and the project took longer then expected. Now I'm not so sure where everything plugs in. Should have taken some notes...

 

[94TURBO5 O]

There are not to many vacuum lines. Do you need to connect all of them or are you just lost on a couple?

 

[Piston]

There are not to many vacuum lines. Do you need to connect all of them or are you just lost on a couple?

I need to know where to plug in that canister line that comes off the firewall on the passenger side.

 

[94TURBO5 O]

What color is it?

 

[Piston]

Its a black rubber hose, just after a small canister that is wrapped in black foam.

 

[wytstang]

where is the canister along the fire wall, driver side, pass side. pics would really help.
EDIT- never mind you did mention it

 

[94TURBO5 O]

It goes to the bottom of the intake on the other nipple. One to pcv and the other to your mystery hose. It is the one that has a plug in the bottom right?

 

[RIO5.0]

This may help...its a stock upper...the line your after is the one that feeds under the intake in the middle...it feeds what your talking about...The one on the neck (large) feeds the vac Tee on the drivers side fenderwell...the line above it (small loop) feeds the FRP...

 

[Piston]

Thanks guys I think I got it!

 

[tb94gt]

Helped me too!!