• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Vaccume Pump Tech

  • Thread starter Thread starter 90mustangGT
  • Start date Start date Aug 25, 2005

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 25, 2005
#1
  • Aug 25, 2005
  • #1
Just want a get a little info on these. I have been hearing a lot about Vaccume Pumps, but the search didn't come up with much. Who is running one and what do you think of it? I have heard it really helps ring seal and is a very "worthwhile" mod on a high output motor.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 25, 2005
#2
  • Aug 25, 2005
  • #2
If you can't spell it, you cant have one.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Aug 25, 2005
#3
  • Aug 25, 2005
  • #3
Well, I'll be damned. No wonder I can't find any info on it.

Vacuum

I never won a spelling bee, if it wern't for my last name starting with a W, I wouldn't even make it to the end of round 1.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 25, 2005
#4
  • Aug 25, 2005
  • #4
LOL... yeah search engines are picky that way.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2005
#5
  • Aug 25, 2005
  • #5
Even with the correct spelling I didn't find anything. If you guys find something can you pm me or post it here?

I would appreciate it.
 
S

stroked86

New Member
Jul 23, 2002
25
0
0
ct
Aug 25, 2005
#6
  • Aug 25, 2005
  • #6
what do you want to know about them?

They are mainly used when low tension rings (.043 top ring for example) are used so that it helps ring seal, it also reduce's crankcase pressure , I wouldnt really suggest these for a street engine but it may be fine with a small amount of vacuum. Def dont use on a new engine untill the rings are seated...
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2005
#7
  • Aug 25, 2005
  • #7
stroked86 said:
what do you want to know about them?
Click to expand...

I want to know everything about them
 
S

stroked86

New Member
Jul 23, 2002
25
0
0
ct
Aug 25, 2005
#8
  • Aug 25, 2005
  • #8
look above what else do you need to know?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 25, 2005
#9
  • Aug 25, 2005
  • #9
http://www.martelbrothers.com/catalog/Electric-Vacuum-Pump-Kit-p-8787.html
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2005
#10
  • Aug 25, 2005
  • #10
stroked86 said:
look above what else do you need to know?
Click to expand...

How much vac is usually needed to get noticeable benefits?
Is the vac pump driven with the acc. belt?
Does anyone use engine/intake vac to provide the vac?
Once air has been pulled from the crankcase where is it usually routed?

All I can think of right now. Got any links? I would love to see a diagram or some pics.

Oh yeah, thanks alot for the info. It is appreciated.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2005
#11
  • Aug 25, 2005
  • #11
Daggar said:
http://www.martelbrothers.com/catalog/Electric-Vacuum-Pump-Kit-p-8787.html
Click to expand...

Answered my question before I even asked it. You are good.

It looks like this product is intended for accessories however (brakes, etc.). Could you just hook it up to the crankcase? I wonder...

I can get that much vac from the intake manifold at idle so it wouldn't be of any benefit to me (if installed for crankcase vac)?
 
S

stroked86

New Member
Jul 23, 2002
25
0
0
ct
Aug 25, 2005
#12
  • Aug 25, 2005
  • #12
electric pumps work ok.... no you cant use the engines vacuum, for one the area its pulling from is to large and it would create a vacuum leak second there is no where to put the oil if a little gets puleed out which usually happens... usually the good pumps are belt driven and on our outlaw car we like around 12-14inches to be pulled... from the vacuum it gos to a overflow canister..

http://store.summitracing.com/defau...earchinresults=false&N=0&target=egnsearch.asp
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2005
#13
  • Aug 25, 2005
  • #13
So could you use engine vac if you had a seperator? Maybe one of the $12 ones from Home Depot, or one of these... MOR-85465 Moroso's oil seperator/breather/accumulator.

As far as the vac leak goes, I am thinking about blocking off the inlet to the crankcase since I already have a vac leak through the pcv valve from the TB/VC hose. It sounds like doing this would give me crankcase vac?

Have you guys had any issues with collapsing gaskets/seals?

Those pumps sure are pricey!!!
 
S

stroked86

New Member
Jul 23, 2002
25
0
0
ct
Aug 26, 2005
#14
  • Aug 26, 2005
  • #14
if you tried to use engine vacuum it would cause a vacuum leak, to much area to pull from unless the engine was 100% air tight then it might work but then the vacuum would probably vary to much
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 26, 2005
#15
  • Aug 26, 2005
  • #15
stroked86 said:
if you tried to use engine vacuum it would cause a vacuum leak, to much area to pull from unless the engine was 100% air tight then it might work but then the vacuum would probably vary to much
Click to expand...

First, I really enjoyed all the info, and greatly appreciate your effort.

I do still have a question though. You have mentioned that using engine vac would not work because there is "too much area to pull from"
Are you saying that the crankcase is too large of a volume for the engine vac to be effective?

I am very confident that my crankcase is fully sealed, and have yet to find any external vac leak in the intake (and I have looked).

All current motors come from the factory using intake vac to vent the crankcase, that is how the pcv works. Well actually it is the pressure difference between the intake and crankcase. Basically, the stock setup, with pcv and hose between TB & VC, has a vac leak.

In a perfect world, one would not need to add an external air pump to the engine to achieve a vac on the crankcase. The motor itself is a great air pump. I guess I just don't understand how the volumes of the intake and crankcase come into play. Can you (or anyone else) elaborate on this for me?

thanks again
jason
 
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
577
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
645
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
154
Fox 5.0 Mustang Tech Thursday at 10:40 AM
AeroCoupe
T
power steering and brake problems at high rpms on road courses
  • The Blurr
  • May 27, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
178
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2025
The Blurr
T
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?