stroked86 said:
if you tried to use engine vacuum it would cause a vacuum leak, to much area to pull from unless the engine was 100% air tight then it might work but then the vacuum would probably vary to much
First, I really enjoyed all the info, and greatly appreciate your effort.
I do still have a question though. You have mentioned that using engine vac would not work because there is "too much area to pull from"
Are you saying that the crankcase is too large of a volume for the engine vac to be effective?
I am very confident that my crankcase is fully sealed, and have yet to find any external vac leak in the intake (and I have looked).
All current motors come from the factory using intake vac to vent the crankcase, that is how the pcv works. Well actually it is the pressure difference between the intake and crankcase. Basically, the stock setup, with pcv and hose between TB & VC, has a vac leak.
In a perfect world, one would not need to add an external air pump to the engine to achieve a vac on the crankcase. The motor itself is a great air pump. I guess I just don't understand how the volumes of the intake and crankcase come into play. Can you (or anyone else) elaborate on this for me?
thanks again
jason