• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

vacuum hoses

  • Thread starter Thread starter BLUEBULITT01
  • Start date Start date Aug 11, 2010

BLUEBULITT01

New Member
Aug 11, 2010
1
0
0
dfw, texas
Aug 11, 2010
#1
  • Aug 11, 2010
  • #1
sup everyone! i just bought a 93' lx 2.3L. my question is there is 2 small vacuum hoses coming from the air intake box. i couldnt find where the one at the front of the box connects to... cars runs pretty good should i even worry bout it? thanks.
 

Red_LX

I’m not much help unless you’re looking for ****!
Founding Member
Nov 29, 1999
5,896
73
129
Morgantown, WV...where couches meet their doom
Aug 12, 2010
#2
  • Aug 12, 2010
  • #2
If it's coming FROM the airbox and isn't connected to anything, you really don't need to worry about that. It's been so long since I had my car I can't remember what that line would have been connected to.
 
D

Delray Dude

New Member
Jul 7, 2010
263
1
0
Aug 13, 2010
#3
  • Aug 13, 2010
  • #3
IIRC: Those lines control the cold warm up valve at the bottom of the airbox. The line should run to a thermo switch - but I wouldn't worry about it at all, especially is the duct from the exhaust manifold to the air box is missing. I personally yanked mine off and let it get the fresh air from up front - but then again I'm in South Florida and the "heated air" isn't really much needed. I was born and raised in DFW and I'm fairly confident you don't need it either. I would swap in a 1993 or 1994 Ranger exhaust manifold and make it run better if i were you. It drops in without having to move the pipe - literally a yank and replace deal - loose 20+ pounds and have a factory shorty header. '95 to '97 Rangers will work but don't have the O2 bung - so some work would be required to make them work.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
347
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
527
Fox 5.0 Mustang Tech Jun 21, 2025
limp
S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
123
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
259
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
S
Mach 1 iac valve in a 4.6 gt
  • solodriverz
  • Jun 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
104
SN95 4.6L Mustang Tech Jun 5, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?