• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Vacuum lines on intake

  • Thread starter Thread starter NIKwoaC
  • Start date Start date Jan 23, 2008

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 23, 2008
#1
  • Jan 23, 2008
  • #1
How can I remove the vacuum tubes on the bottom of an upper intake without damaging them? I'm getting ready to paint my Explorer upper/lower, and I want to remove the tubes both because it would be easier to paint and also, I don't need all the extra vacuum lines for my old 5.0. Somebody told me they are press-fit in. Is this true? I've been too afraid to tug on them to find out.
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 23, 2008
#2
  • Jan 23, 2008
  • #2
On my explorer intake the black one with the three connections on it was a press and fit and I could actually pull that out, I wouldnt try to pull the others. The two long ones in the back I cut to size, then I had it powdercoated.

For the vac connections on the explorer intake I put the egr/thermactor line on the extra port on the vacuum tree, on my '91 there a extra port anyway. I put the rest in their logical places, and capped a few in the front.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 24, 2008
#3
  • Jan 24, 2008
  • #3
Did you damage the 3-way connector when you pulled it out? did it look like they used some sort of loc-tite adhesive to hold it in?
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 24, 2008
#4
  • Jan 24, 2008
  • #4
they make a release agent for loc-tite
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Jan 24, 2008
#5
  • Jan 24, 2008
  • #5
LiquidGT said:
On my explorer intake the black one with the three connections on it was a press and fit and I could actually pull that out, I wouldnt try to pull the others.
Click to expand...
I agree.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 24, 2008
#6
  • Jan 24, 2008
  • #6
Well I'm going to try to pull at least the ones I don't need and fill the holes with JB weld and sand them down real nice like before I paint. I guess we'll see how easy those are to pull, and go from there. If anybody else has some real experience with this, your input is still welcome.
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 24, 2008
#7
  • Jan 24, 2008
  • #7
NikwoaC said:
Did you damage the 3-way connector when you pulled it out?
Click to expand...

No I didn't damage it at all, I was just messing with it and I noticed that I could wiggle it. Took it out with pliers checked for gunk and pressed it back in.

I wish I would've got rid of that vac connection right over the left valve cover.

Be sure to grind off that nasty bracket thing on the front of the intake.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jan 24, 2008
#8
  • Jan 24, 2008
  • #8
LiquidGT said:
No I didn't damage it at all, I was just messing with it and I noticed that I could wiggle it. Took it out with pliers checked for gunk and pressed it back in.

I wish I would've got rid of that vac connection right over the left valve cover.

Be sure to grind off that nasty bracket thing on the front of the intake.
Click to expand...

Check it out: I got all the lines out , no damage. Gonna clean out the holes, throw some loc-tite in there, push 'em back in and call it a day. After I paint the intake, of course. Which has proven to be a problem... Sooo many little holes to tape off...... And the old paint is sooooooooo hard to strip (I've bought more hazardous chemicals in a week than a meth addict does in a year). But if all this hard work and loss of brain cells pays off, its gonna be a pretty sweet looking intake. Expect pics for sure.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
582
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
630
Fox 5.0 Mustang Tech Jun 21, 2025
limp
Vacuum line question?
  • Mustang Momma
  • Feb 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
254
1996 - 2004 SN95 Mustang -General/Talk- Mar 3, 2026
Noobz347
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?