valve body or shift kit?

[amplifier28]

The tranny shifts ok but not perfect. It seems to not go into overdrive at full throttle unless I let go of the gas pedal a little bit. Is that a sign of tranny breakdown?

 

[smittyb]

You don't want your tranny go into OD at full throttle, that will cause breakdown.

 

[ponyboy19]

that is why-When doing the installation, You should leave that small little box "WOT-OD" not hooked up! ya will never have that problem-Like me! It doesnt have to be intslled, I love my Trans-go shift kit,

Mind giving some explaination on how to unhook it.. My transgo used to be pretty good, now the thing wants to shift into OD at WOT all of a sudden. Sometimes it will, sometimes it won't? Not to mention I think it's a bit soft on the shifts. Edge 2400 converter, 4.10 gears, and drag radials and it doesn't even think of barking a 1-2 shift at WOT in D. I used to brag it up, but now I think the trans-go just needs to go.

 

[amplifier28]

Anymore comments on a Baumann shift kit with a boost valve kit and their stock tranny overhaul kit along with an Edge 3000 RPM stall converter? Will this combination be ok? What will I lose if I do not go with a Lentech's valvebody?

 

[$uperstang]

Get the Trans GO shift kti and do not install the 3-4 spring that eliminates full throttle shifts in to OD. I have an AOD re-built with TransGO shift kit and a 3200 Edge lock up converter, works great!!!

 

[smittyb]

Amplifier check PM's.

 

[amplifier28]

Anymore comments or suggestions about Baumann shift kits?

 

[amplifier28]

Thanks!!!