Valve Cover baffles

26_chromevalvecovers.jpg


These look to me like stock chrome valve covers. :shrug:

I have used stock valve cover many times taking out the baffle covers and grinding off the humps where they were bolted to. They work just fine. No need for an intake spacer and no problems with oil in the intake.
This should be just the same with the stock chrome valve covers as well.
They are made by KRS and I have used these before as well and the filler neck came loose on them before I installed them.:notnice: They are not the same quality as OEM but I suppose they could work. They just didn't work too well for me.
 
KamiKaziDK said:
Really? Cause I've seen a few 5.0s set up like that and I don't imagine they had problems if they were doing it. Then again, maybe they had problems and didn't realize that's why :P Good to know though.

My 5.0 used to be set up like that with the breather cap too. I had oil coming out of my VC gaskets so I threw the breather on to solve it and no more oil came out. I never had any major ping issues because I later found out that my PCV filter screen was almost completely clogged. That prevented the unmetered air from entereing my intake charge. Later I did research on how the PCV system actually works and saw the error of my ways so I put in a new PCV filter, grommet, valve, and a PCV oil seperator along with a proper oil filler cap and the car acutally ran better. :D Now for the bling facotr I like the look of the breather cap, so I'm modifying the breather cap by plugging the air hole (preventing the outside unmetered air from entereing the crankcase) in the threaded portion of the cap so it can be used with a functioning PCV system.
Tim
 
89sleeper said:
26_chromevalvecovers.jpg


These look to me like stock chrome valve covers. :shrug:

I have used stock valve cover many times taking out the baffle covers and grinding off the humps where they were bolted to. They work just fine. No need for an intake spacer and no problems with oil in the intake.
This should be just the same with the stock chrome valve covers as well.
They are made by KRS and I have used these before as well and the filler neck came loose on them before I installed them.:notnice: They are not the same quality as OEM but I suppose they could work. They just didn't work too well for me.

Those are the ones i just bought - my dad called the guy on that site, and he said they cleared his 1.7 Roller Rockers fine, and they ARE for what i'm using them for - w/o spacer needed i beleive - sweet lookin too - I like them alot- anyone need a set of carb chrome valve covers? lol

Yea, they def have to be chrome, won't have dull valve covers on a shiny engine, cuz the valve covers are quite big, and you definately see alot of them, so the shinyer the merryer lol haha (don't know how to spell shinyer or merryer correctly lol) totally gonna be a show car - daily driver