• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Valve Cover baffles

  • Thread starter Thread starter Paul Perreca
  • Start date Start date Oct 12, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Oct 15, 2005
#21
  • Oct 15, 2005
  • #21


These look to me like stock chrome valve covers.

I have used stock valve cover many times taking out the baffle covers and grinding off the humps where they were bolted to. They work just fine. No need for an intake spacer and no problems with oil in the intake.
This should be just the same with the stock chrome valve covers as well.
They are made by KRS and I have used these before as well and the filler neck came loose on them before I installed them. They are not the same quality as OEM but I suppose they could work. They just didn't work too well for me.
 

18mustangs

New Member
Jun 8, 2005
533
1
0
Virginia Beach, VA
Oct 15, 2005
#22
  • Oct 15, 2005
  • #22
KamiKaziDK said:
Really? Cause I've seen a few 5.0s set up like that and I don't imagine they had problems if they were doing it. Then again, maybe they had problems and didn't realize that's why Good to know though.
Click to expand...

My 5.0 used to be set up like that with the breather cap too. I had oil coming out of my VC gaskets so I threw the breather on to solve it and no more oil came out. I never had any major ping issues because I later found out that my PCV filter screen was almost completely clogged. That prevented the unmetered air from entereing my intake charge. Later I did research on how the PCV system actually works and saw the error of my ways so I put in a new PCV filter, grommet, valve, and a PCV oil seperator along with a proper oil filler cap and the car acutally ran better. Now for the bling facotr I like the look of the breather cap, so I'm modifying the breather cap by plugging the air hole (preventing the outside unmetered air from entereing the crankcase) in the threaded portion of the cap so it can be used with a functioning PCV system.
Tim
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Oct 15, 2005
#23
  • Oct 15, 2005
  • #23
89sleeper said:


These look to me like stock chrome valve covers.

I have used stock valve cover many times taking out the baffle covers and grinding off the humps where they were bolted to. They work just fine. No need for an intake spacer and no problems with oil in the intake.
This should be just the same with the stock chrome valve covers as well.
They are made by KRS and I have used these before as well and the filler neck came loose on them before I installed them. They are not the same quality as OEM but I suppose they could work. They just didn't work too well for me.
Click to expand...

Those are the ones i just bought - my dad called the guy on that site, and he said they cleared his 1.7 Roller Rockers fine, and they ARE for what i'm using them for - w/o spacer needed i beleive - sweet lookin too - I like them alot- anyone need a set of carb chrome valve covers? lol

Yea, they def have to be chrome, won't have dull valve covers on a shiny engine, cuz the valve covers are quite big, and you definately see alot of them, so the shinyer the merryer lol haha (don't know how to spell shinyer or merryer correctly lol) totally gonna be a show car - daily driver
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
476
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
H
1995 cobra engine noise help
  • Holt2010
  • Nov 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
55
1996 - 2004 SN95 Mustang -General/Talk- Nov 8, 2026
Holt2010
H
P
Vacuum
  • ProTechAutoServices
  • Aug 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
337
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
Engine (EGR Deleted) Solution the hotter combustion chambers?
  • PonyGTrider
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
97
Views
5K
Fox 5.0 Mustang Tech May 2, 2026
PonyGTrider
Engine Crankcase vent tube “relocation”?
  • Mcmahst
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
875
Fox 5.0 Mustang Tech Dec 20, 2025
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?