Valve cover clearance ???

monte87

Founding Member
Feb 26, 2001
876
18
49
new york
Guys-

Just got some new stock height valve covers. FORD RACING aluminum finned, because my old 3 3/4 ford rmotorports were interfering with the throttle cable bracket on the GT40 tubular set up.
I wanted to know-Will i have rocker issues (1.6's RR) hitting the V/C with these??? can anyone with this set up help me out with some 411?

Thanks Anthony:nice:
 
I have 1.7 RR covered with stock 1990 valve covers. It works, but they needed to be "massaged a little. It is not a direct bolt on. I am pretty sure that somewhere I saw a post with what mods are needed for the stock VC...
 
Thats what i was thinking...... It just cannot be easy, you have to work for it! I have no idea why the Ford racing V/C have all thos retarded bosses underneath, excpet the baffle. More fuggn work for some stupid ass ****!!!!

Thanks Ant
 
I have the tubular intake, too. On my car the throttle bracket interfered with the finned aluminum Ford Racing valve cover on the passenger side. I solved it by using a 1" spacer between the upper and lower intakes. The finned valve covers clear the 1.6 FRPP roller rockers just fine.
 
Thanks Bud. I have a 1 inch spacer, forgot to mention in my post, My bad. Im smoothing out all the bosses anyhow & removing the baffle, Dont wanna run into anymore tedious small crap that holds a crank up. :)

Thanks Anhtony

I have the tubular intake, too. On my car the throttle bracket interfered with the finned aluminum Ford Racing valve cover on the passenger side. I solved it by using a 1" spacer between the upper and lower intakes. The finned valve covers clear the 1.6 FRPP roller rockers just fine.