Valve seals....oh fun!!!!

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Sep 9, 2006

#1

• Sep 9, 2006

• #1

ite guys im looking into changing the valve seals, cuz mine disinegrated, the other day, when I poured seafoam in it. What it the easiest way to change them, compress the spring take out retainer and then im good? I will also be filling the chamber up with air, to hold the valves in place.

Thanks Josh

 

R

R2D2

Sep 9, 2006

#2

• Sep 9, 2006

• #2

Simple, compressed air to hold valve in place, compress spring, pull locks, release spring, pull retainer then remove spring, replace seals, put it back together in reverse order

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Sep 9, 2006

#3

• Sep 9, 2006

• #3

yeah thats what I was thinking, thanks sbftech!!

Josh

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

2

58

Port Elgin, Ontario

Sep 9, 2006

#4

• Sep 9, 2006

• #4

how did seafoam cause this

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Sep 9, 2006

#5

• Sep 9, 2006

• #5

Well your not going to believe this but my mom just talked to my grandpa and he said he put seafoam in his oil also and he said it smoked like a mofo, and that he drained the oil and filter 3 times and it quit smoking. yes seafoam caused this, how? I have no clue, but I put it in and boom! instant smoke, changed oil, still getting blow-by, but the smoke wasnt that much today, so maybe its getting better!!!

 

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Sep 9, 2006

#6

• Sep 9, 2006

• #6

I am pretty sure the seafoam thins out the oil pretty bad.

As a fuel additive I can see the value of it, but as a general rule of thumb...
Solvents should not be added to the oil.

Try not to run the car real hard until it quites smoking.
But it should clear up.


As for the seal change...
I have been told to use a low pressure level to keep the valve in place.
This will allow you to change the seals with the piston at TDC. This way if the valve does drop for some reason, it will just fall on the top of the piston and not fall into the bore.

jason

 

3

310stanger

New Member

Aug 15, 2006

170

1

0

Sep 10, 2006

#7

• Sep 10, 2006

• #7

this may be a dumb question but where im from sea foam isnt a known thing. someone explain to me what it is? im thinking theres zero chances its ever going in my engine

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Sep 10, 2006

#8

• Sep 10, 2006

• #8

where you from, all you got to do is just go to a beach and put it in!!! J/K LOL Its usually in like autozone or some where of the like, it thins out the oil to break up the sludge and then run it 5 mins and drain oil and put new plugs in, only prob is it dosent say it on the bottle, or I didnt see it.

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

2

58

Port Elgin, Ontario

Sep 10, 2006

#9

• Sep 10, 2006

• #9

I sucked mine through my brake booster line (on my truck) and it smoked for a good 15 minutes

 

ninety15.0

New Member

Mar 10, 2004

1,336

0

0

Sep 10, 2006

#10

• Sep 10, 2006

• #10

its supposed to make it smoke....