• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Vents in dash won't change from defrost.

  • Thread starter Thread starter gcomfx.com
  • Start date Start date Jun 29, 2005

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Jun 29, 2005
#1
  • Jun 29, 2005
  • #1
This is the first time it's ever happened to me. I know the door flap is controlled by vacuum. I haven't had time to look for the problem, but could you guys start listing normal places this breaks at?

Thanks in advance for any help. It's a hot MOFO here.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jun 29, 2005
#2
  • Jun 29, 2005
  • #2
There is a small vacuum line running from the vacuum tree on the driver side fender near the firewall, behind the intake, to the passenger side, where it goes through the firewall. It's most likely broken. I have a pic around here somewhere, I'll scrounge it up for you.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jun 29, 2005
#3
  • Jun 29, 2005
  • #3
Here ya go:





EDIT: Oh yea, to fix it, just go to your parts store (Advanced Auto, O'Reilly's whatever) and just get some vacuum hose that fits over that (you won't find any that will fit inside it) and get some way to clamp it on. I just used electrical tape, and it's held up just fine for over a year now. Good luck
-Chris
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Jun 29, 2005
#4
  • Jun 29, 2005
  • #4
Will check that out! Thanks... any other thoughts just in case?
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Jun 29, 2005
#5
  • Jun 29, 2005
  • #5
That's def it. You must have a dry rotted vac line connector where it connects to the tree or the line just melted.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jun 29, 2005
#6
  • Jun 29, 2005
  • #6
Happened to me couple of years ago... Mine was broke right by a connector, in the area I think just behind the intake area. Good thing about that is one of the quickest, easiest, cheapest fixes on a common problem. I even fixed it with just duct tape until I got to the auto store.

RC
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Jun 29, 2005
#7
  • Jun 29, 2005
  • #7
Yeah, very common problem. I have broke mine twice. Once while doing my clutch, the other while installing my intake.
Scott
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 29, 2005
#8
  • Jun 29, 2005
  • #8
mine has broken twice in the last month. it just broke again today because the a/c started coming out the defroster.

time to make a more permanent fix i guess.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Jun 30, 2005
#9
  • Jun 30, 2005
  • #9
94GTLaserRC said:
Good thing about that is one of the quickest, easiest, cheapest fixes on a common problem. RC
Click to expand...

It's about time I found an easy fix. Hopefully it'll be as easy as everyone elses.

Thanks again everyone. I've been swamped with a new job, and trying to get a new design finished for 100mphclub.com - we just had our first annual Power Tour in our area.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Jun 30, 2005
#10
  • Jun 30, 2005
  • #10
Pulled in tonight, popped the hood to let it cool down while I went to change clothes. Thought I would take a quick peek and what do you know. The little plastic tube isn't connected to the tree. Actually took longer than I expected to get the broke end out of the rubber reducer, but I cleaned it out, pushed it back in... put it back on the tree and there you go. Vents worked again.

Thanks everyone! Solutions posted with pics even.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jun 30, 2005
#11
  • Jun 30, 2005
  • #11
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jun 30, 2005
#12
  • Jun 30, 2005
  • #12
Free Post..
RC





EDIT: See the post below...I want to say "I see you got your free post too", but I didnt want to be a post whore and add even another by replying..

So Scott... You got one too!!

RC (edited after Scott posted)
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Jun 30, 2005
#13
  • Jun 30, 2005
  • #13
94GTLaserRC said:
Free Post..
RC
Click to expand...

Because after all, you need them.....
Scott
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jun 30, 2005
#14
  • Jun 30, 2005
  • #14
i heard at the end of every year, you get one dollar for every post you have.....
Vortech here i come
 
You must log in or register to reply here.

Similar threads

J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
247
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
Resolved No air to the vents, only air to the defrost and feet
  • Dontknowchit
  • Mar 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 30, 2025
Dontknowchit
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
450
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
193
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
320
SVT Tech Forum Nov 20, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?