• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Vibration thats felt in the seat? Rear end...

  • Thread starter Thread starter Cobra1894
  • Start date Start date Nov 18, 2005

Cobra1894

New Member
Oct 7, 2003
196
0
0
Broken Arrow, OK
Nov 18, 2005
#1
  • Nov 18, 2005
  • #1
I have a vibration in my seat in the mornings and after work when the car is cold... What are the possible causes. I just replaced the trans mount, u-joints, tailshaft bushing and yoke. The rear end is a used replacement peice that has been in the car for a few months. The driveshaft has about 3/4 in play when I turn it by hand. Is my rear end shot? I need to upgrade my gears anyway, but is there anything else I should replace at the same time I do the gears? Thanks!
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Nov 18, 2005
#2
  • Nov 18, 2005
  • #2
One could imply from your post that the vibration goes away or isn't there when warm. Is that the case? Plus, get new bearings, races, seals, and clutches when you change the gears. Yeah, more time and $, but you won't have to mess with it again for years....
 

blkstangman88

New Member
Apr 6, 2004
646
0
0
Nov 18, 2005
#3
  • Nov 18, 2005
  • #3
If it was ur rear end u would feel it at any speed and no matter how warm or cold ur ca is, trust me, i bent my pinion at 70 on the freeway from the bearings exploding, and it felt like my car was going to fall apart. got it to the shop and it was bent 3/4in, looked like a bent d$#%.
id start looking other places first.
 

Cobra1894

New Member
Oct 7, 2003
196
0
0
Broken Arrow, OK
Nov 21, 2005
#4
  • Nov 21, 2005
  • #4
What would explain the play in the driveshaft. I can rotate it 3/4in, and since it is a used rear end I thouhg that would most likely the cause. What are the other possibilities? I can feel the rear end screw up at slower speeds but it seems to get really bad the faster I go. As it warms up it seems to calm down but is still there. What would happen if all my oil leaked out from the rear? I have a small leak.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Nov 21, 2005
#5
  • Nov 21, 2005
  • #5
if you are sure it's in the rear end you could start by changing the diff fluid to see if that helps.
 

Cobra1894

New Member
Oct 7, 2003
196
0
0
Broken Arrow, OK
Nov 23, 2005
#6
  • Nov 23, 2005
  • #6
Any other ideas...
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Nov 23, 2005
#7
  • Nov 23, 2005
  • #7
If all the fluid leaked out of the rear end, you'd be hearing all kinds of grinding and growling. It's not uncommon to be able to move the driveshaft slightly when the car is in gear and the engine is off. When you say you can feel the rear end screw up at slower speeds, can you explain that more specifically?
 
T

tylerrocks

New Member
Oct 13, 2005
514
0
0
Big Spring, TX
Nov 23, 2005
#8
  • Nov 23, 2005
  • #8
ss93cobra said:
If all the fluid leaked out of the rear end, you'd be hearing all kinds of grinding and growling. It's not uncommon to be able to move the driveshaft slightly when the car is in gear and the engine is off. When you say you can feel the rear end screw up at slower speeds, can you explain that more specifically?
Click to expand...


Ditto

Tyler
 
You must log in or register to reply here.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
594
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
668
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
419
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
334
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Can makes noises when driving poping
  • Creomod
  • Oct 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
601
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2025
Creomod
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?