• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

vin

  • Thread starter Thread starter peter win
  • Start date Start date Aug 13, 2008
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 13, 2008
#1
  • Aug 13, 2008
  • #1
I have 2 1986 gt and I would like to find a copey of the window sticker and vin info. and what motor I have early or late . does anyone know of the web site . I was told that ford has a web , but I can not find it. THANKS
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 13, 2008
#2
  • Aug 13, 2008
  • #2
What do you mean, "early or late motor"? As far as I know, the 1986 5.0L engine did not change at any time during the model year.
 
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 13, 2008
#3
  • Aug 13, 2008
  • #3
This has been very confusing to me , I was told that half way thru the year they changed the heads .I was told at a show be the so called mustang guru .
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 13, 2008
#4
  • Aug 13, 2008
  • #4
I don't ever recall hearing or reading that. The heads were E6s throughout the 1986 model year, then in 1987 the heads were changed to E7s.
 
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 13, 2008
#5
  • Aug 13, 2008
  • #5
my sept 86 stang has a1987 spark plug wire ,she only has 6000 miles never had a tune up or ever been worked on outside oil change that was done here. Now could this have a 87motor since it is a late 09/86. someone out there must know ? Ps This car sat still since 1991 till last sept07
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 14, 2008
#6
  • Aug 14, 2008
  • #6
It only has 6000 miles on it? Holy Christ! We need pictures!



As for the engine, I can't say, I've googled it and came up with nothing, and I know none of my books say anything about mid-year changes in the motor. If it has 4 eyes, it likely has the E6 heads. Stick you head under the hood and look for identification on the cylinder heads. If its an '86 engine, it should have a sticker or a tag on the side of the cylinder head that says "E6SE" somewhere on it.

Keep me informed, now I'm curious.
 
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 14, 2008
#7
  • Aug 14, 2008
  • #7
I have some photos but not to sure how to send them , nikwoac send me your e mail on private
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 14, 2008
#8
  • Aug 14, 2008
  • #8
So I went and stuck my head under the hood and on the passenger side valve cover, I have a sticker that reads "E6SE" and some other numbers. Now my best book claims the heads are E6AE for the 1986 model, so I don't know if the sticker really is denoting the heads or the valve covers or what.
 
L

lang williams

New Member
Jun 11, 2003
567
0
0
cleveland, oh
Aug 14, 2008
#9
  • Aug 14, 2008
  • #9
could they have run out of e6's an threw e7's on to finish the model run?
 
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 14, 2008
#10
  • Aug 14, 2008
  • #10
I checked on pass side v cover and reads as 6k335 CA+10 (top row) 6-21-B-R00 GC ( bottom row)
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 15, 2008
#11
  • Aug 15, 2008
  • #11
I'm not sure, because that would have required a change in the pistons, too. The '86 pistons have no valve reliefs.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Aug 15, 2008
#12
  • Aug 15, 2008
  • #12
Looking at those pictures you sent me, I see that the intake has the correct '86 plaque. Other than that, I can't identify anything different ('86 VS '87) on the motor. The upper intake casting is a slightly different shape and color '86 to '87, but it is hard to see the difference without them side-by-side. I'm hoping someone steps into this thread that might give you better information than me!
 
P

peter win

New Member
Aug 10, 2008
7
0
0
Aug 15, 2008
#13
  • Aug 15, 2008
  • #13
I would realy like to find out for the truth so I can put this to rest . For the car as long as I have it there will be no mods or changes of any sort. The car has never had the wind sheld wipers put on or pass window put down till I got it .
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Aug 15, 2008
#14
  • Aug 15, 2008
  • #14
Why dont you try checking around this Forum? 1982-1993 Mustang GT Registry
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Aug 15, 2008
#15
  • Aug 15, 2008
  • #15
lang williams said:
could they have run out of e6's an threw e7's on to finish the model run?
Click to expand...


Nope. That would be like throwing a 300HP 3V 4.6L into the last of the 2004 GT's just cuz they ran out of 2V's.

Ford wouldn't do that and potentially hurt sales of their new face-lift model.

Would you buy a brand new Z06 if the leftover models got the same goodies right before the debut?

All 1986 motors are the same. They all received the crappy E6 heads. Only the 87+ aero cars got the E7's. For ford to slap E7's on an '86 motor would require notching the pistons as well as a new computer and tune. It's simply not worth it for ford to invest the money into an insignificant mid-year change like that with a new model about to debut.


Having 1987 wires doesn't mean anything in terms of what year the motor is. All it means is someone took the car for a tuneup sometime around 1987-1988 at a local ford dealer and had them replaced
 
J

jefferz

Member
Oct 21, 2004
110
1
19
Spokane, WA
Aug 16, 2008
#16
  • Aug 16, 2008
  • #16
peter win said:
I have 2 1986 gt and I would like to find a copey of the window sticker and vin info. and what motor I have early or late . does anyone know of the web site . I was told that ford has a web , but I can not find it. THANKS
Click to expand...

The guy I talked to at ford I believe told me their records only go back 10 years. I was able to get the window sticker for my 2002, but my 95 I was not. Luckily, he found an original invoice though from my 95 and sent that to me.
 
You must log in or register to reply here.

Similar threads

M
How To Decode
  • Malcoll1
  • Mar 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
418
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
FoxChasis
F
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
271
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
411
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
Clyde's leather seat restore seat coloring question
  • txcoqui
  • Feb 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
311
SN95 4.6L Mustang Tech Feb 23, 2026
Mustang5L5
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
319
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?