• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Voltage Regulator aka Slosh Module

  • Thread starter Thread starter KillSwitchNY
  • Start date Start date Jan 20, 2006
K

KillSwitchNY

New Member
Jan 20, 2006
3
0
0
Levittown, NY
Jan 20, 2006
#1
  • Jan 20, 2006
  • #1
where can i get an instrument voltage regulator for my 88 GT?

called a few local dealers and they say its obsolete. i really need it because my fuel guage is never accurate, i alredy replaced the sending unit. that fixed the problem slightly by just keeping the needle visible instead of going behind the dash past full when i only have 1/4 tank.

i know this is a common problem but i cant believe the part is obsolete. PLEASE HELP!!! ive been going crazy trying to find one.

there are a few for sale on ebay and such but they say for 1965 - 86!!???

is either of these the right regulator? there are 2 pics attached please help.
 

Attachments

  • voltage regulator 1.webp
    7.4 KB · Views: 613
  • voltage regulator 2.webp
    6 KB · Views: 620

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Jan 20, 2006
#2
  • Jan 20, 2006
  • #2
neither one of those look like the one in my dash....
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Jan 20, 2006
#3
  • Jan 20, 2006
  • #3
The first one you show looks like something out of a 60-70s vehicle. The second one I think was used up until the mid 80's. The one in your 88 should look like a small circuit board about 2 inches square.



The pic Tmoss shows is from a 90's car I'm guessing. At least that's where the 93 IVR is located. The 87-89 is mounted flat against the back of the instrument cluster board and attached with a screw.

Your best bet would probably be to scavenge a junkyard for an instrument cluster from an 88 and remove the board. The components on the 87 and 89 IVRs are not all the same and I don't know what the changes were for or if they would be interchangeable even though the board is physically the same.
 

Attachments

  • sloshxj8.th.webp
    9.6 KB · Views: 288

bobcatv8

Member
Aug 25, 2004
141
1
16
Ocala,FL
Jan 20, 2006
#4
  • Jan 20, 2006
  • #4
The Ford part # is E9ZZ-10E849-A. It is called an amplifier asy. and was discontinued by Ford on 5/23/2003.
Try the obsolete Ford parts people, no Ford dealer in the U.S. shows one.
The part on the left you show is an external voltage regulator used into the '90s, the part on the right is a "constant voltage regulator" for the instrument panel used into the late '80s.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Jan 20, 2006
#5
  • Jan 20, 2006
  • #5
Thanks for setting that straight Saleen.......
 
K

KillSwitchNY

New Member
Jan 20, 2006
3
0
0
Levittown, NY
Jan 21, 2006
#6
  • Jan 21, 2006
  • #6
Saleen0679 said:
The first one you show looks like something out of a 60-70s vehicle. The second one I think was used up until the mid 80's. The one in your 88 should look like a small circuit board about 2 inches square.

he pic Tmoss shows is from a 90's car I'm guessing. At least that's where the 93 IVR is located. The 87-89 is mounted flat against the back of the instrument cluster board and attached with a screw.

Your best bet would probably be to scavenge a junkyard for an instrument cluster from an 88 and remove the board. The components on the 87 and 89 IVRs are not all the same and I don't know what the changes were for or if they would be interchangeable even though the board is physically the same.
Click to expand...


is the slosh module connected to the back of the fuel and oil pressure guage? someone is selling the fuel and oil guage peice only. did the guages come with the anti slosh already on them?
 

Attachments

  • part # E7ZZ-9305A.webp
    14.5 KB · Views: 417
K

KillSwitchNY

New Member
Jan 20, 2006
3
0
0
Levittown, NY
Jan 21, 2006
#7
  • Jan 21, 2006
  • #7
oh wait , i see ... the voltage/temp

tach
speedo
and oil/ fuel guages are all seperate peices but are put on a board right?
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Jan 22, 2006
#8
  • Jan 22, 2006
  • #8
The gauges come in the four separate assemblies that you named and are mounted into the plastic housing and connected by a flexible printed circuit on the back of the housing.
 
You must log in or register to reply here.

Similar threads

R
1987 LX 5.0 Slosh module/ Voltage Regulator
  • Riley Barth
  • Jun 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
166
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 8, 2025
Riley Barth
R
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
79-86 Mustang Instrument Voltage Regulator (IVR)
  • sparkylawdog
  • Sep 30, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
543
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 16, 2024
Rcdgl
R
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?