My voltage of TPS is 0.985V +/- 0.003V, and my WOT=5V aprox., when the engine is cold or warm voltages change, this is normal??
Voltages of TPS
- Thread starter Luis911
- Start date
cenok is family
15 Year Member
Boostedpimp
20+ Year Stangneter 
stang&2Birds
Founding Member
He likely posted how to do the RICER mod of adjusting the TPS, and then did a search. Then, he realized that he was asking about a stupid ricer mod that totally clueless people had been telling him about.
Just my guess.
For the record, I adjust my TPS to 0.999999999999999999999v. After doing that,
#5)I've been on the same talk of gas for OVER 40 YEARS!
#4) I've won EVERY quarter mile race EVER RUN!
#3) The engine idles to smoothly, it's impossible to tell when it's running or not.
#2) My engine has so much HP, it has blown up EVERY Dyno that it has ever been put on!
And, since adjusting my TPS...
#1) Pigs fly out of my *ss at the rate of 10 per minute!
The moral of the story?
Unless you want 1000 pound pigs coming from your *ss at a rate of 10/min for 24/7/365
, LEAVE YOUR TPS ALONE!! 
FYI:
Mustang TPS FAQ
Just my guess.
For the record, I adjust my TPS to 0.999999999999999999999v. After doing that,
#5)I've been on the same talk of gas for OVER 40 YEARS!
#4) I've won EVERY quarter mile race EVER RUN!
#3) The engine idles to smoothly, it's impossible to tell when it's running or not.
#2) My engine has so much HP, it has blown up EVERY Dyno that it has ever been put on!
And, since adjusting my TPS...
#1) Pigs fly out of my *ss at the rate of 10 per minute!
The moral of the story?
Unless you want 1000 pound pigs coming from your *ss at a rate of 10/min for 24/7/365
, LEAVE YOUR TPS ALONE!! FYI:
Mustang TPS FAQ
LiquidGT
Member
Where did this adjusting TPS stuff come from?
I never felt any kind of difference from adjustment, now I just leave it alone.
I never felt any kind of difference from adjustment, now I just leave it alone.
He likely posted how to do the RICER mod of adjusting the TPS, and then did a search. Then, he realized that he was asking about a stupid ricer mod that totally clueless people had been telling him about.
Just my guess.
For the record, I adjust my TPS to 0.999999999999999999999v. After doing that,
#5)I've been on the same talk of gas for OVER 40 YEARS!
#4) I've won EVERY quarter mile race EVER RUN!
#3) The engine idles to smoothly, it's impossible to tell when it's running or not.
#2) My engine has so much HP, it has blown up EVERY Dyno that it has ever been put on!
And, since adjusting my TPS...
#1) Pigs fly out of my *ss at the rate of 10 per minute!
The moral of the story?
Unless you want 1000 pound pigs coming from your *ss at a rate of 10/min for 24/7/365
FYI:
Mustang TPS FAQ
Haha, that's good stuff. More of a rant, but it is good information. I never messed with my TPS, even after the TB swap, and never had any problems. I guess TB manufacturers cover their ass by instructing buyers to check their voltage after the install, in case their TPS or TB is out of whack.
Dino Dino Bambino
15 Year Member
I have my TPS voltage set at 0.99v throttle closed and 4.63v wide open on my Summit Racing 75mm TB with TPS adjustment.
Similar threads
