We have a '95 GT that we are swapping motors in. The motor we have is a '93 5.0 that was stroked to a 327, fully built. It came with a Vortech V1 installed. We got a killer deal on this, that is why we purchased in instead of a '95 motor. We have already had to move the ABS box and brake lines. The problem we have now is the clearance with the fan. We have a Fluidyne radiator. We only have 2.25" between the radiator and the crank pulley. We are considering putting Flex-A-Lite 230 dual 12" pusher fans on the front and running a 15" puller fan on the inside to the side of the crank pulley. Would this keep things cool enough? The guy that built the motor said it should be pushing over 500hp. What recommendations do you have?