Wanting 300 rear wheel hp

flewthecoupe · Mar 6, 2004

What is the best combo of heads, intake, exhaust, and other bolt ons I can use to achieve this? There are only 39,000 or so miles on the engine so I don't want to rip it apart just yet, or will I have to? And I would like to stay away from Nos.

Thanks in advance,
Michael

Here is what I had in mind:

AFR165/185 or similar heads (GT40X, TFS, etc)
GT40, Cobra, or Explorer upper and lower intake
65mm TB
73mm MAF calibrated for injectors
2.5inch exhaust
Headers
24# injectors
FPR
190lph or better fuel pump
E303 cam or custom grind as needed

What would you change or add to this list?

Thanks again,
Michael

67stang390 · Mar 6, 2004

A lot of people are achieving those numbers with an AFR/Edelbrock intake/FTI custom cam combo. I personally like the Trick Flow package; I think it's a great deal.

Car Nut · Mar 6, 2004

I'm also interested in this exact topic. I've always been a bit discouraged, because I have to pass emissions. Depending on where you live, you may not be concerned with emissions at all. I've got a lot of miles on my stock block, but when I eventually do H/C/I my stock block will be cleaned up, so I'm kind of in the same boat as you. 39K miles is barely broken in.

Good post.

94Five0 · Mar 6, 2004

oo ya got yourself a cream puff...

its not cheap but a small turbo will make 300 rwhp w/ its eyes closed standing on it s head.. actaully it'll proble make 450-500 rwhp ona stock 5.0..a stroker would put it @ 560-700 hp.

nitrous is the fastest/cheapest way. i'm running it and a 100 shot added almost 90 horses over stock. its in check, on tap an has a bunch of failsafes in place, so i'm not worried about it. its the tune that grenades a block, not the poweradder.

Rootus · Mar 6, 2004

There are three basic combos I would consider if I were starting from scratch, depending on what my ultimate goal was.

1. For the absolute best in N/A power, the AFR165/custom cam/Edelbrock combo. Not cheap, but the best rarely is. (this is the route I did take with my 95).

2. For excellent power on a budget, the Trickflow kit. At a little over $2000, it'll come within spitting distance of the AFR/FTI/Edelbrock combo for noticably less money.

3. For a boosted setup, I would get GT40 heads and a custom cam (unless I was starting with a Cobra motor, in which case I'd just get the cam of course), and a HP Performance turbo kit. This is the route I wish I had taken. I suspect it wouldn't have cost significantly more than what I've ended up spending on the N/A setup.

Dave

flewthecoupe · Mar 7, 2004

Thanks everyone for all the input. I'm just hoping that with the right bolt ons and the right set of gears I can push 3800 pounds into the high 13's or low 14's.

Thanks again for letting me pick your brains,
Michael

Stump1000 · Mar 7, 2004

high 13's or low 14's? You dont have any goals do you? you shoudlnt need heads and intake to go high 13's.... or 300rwhp. What is your current setup? whats it run?

flewthecoupe · Mar 7, 2004

Let's just say the car this is all going on runs mid to high 15's stock.

94Blue302GT · Mar 7, 2004

i'd say you need a decent H/C/I for the 300 horse, the 13's won't be too difficult.
If you're on some sort of budget, get an intake and heads off of like a 97 explorer. it's all gt40 stuff there, and that will probably get you to about mid-upper 13's. Especially if you get a cam.

stangin it · Mar 7, 2004

How about do a search this has only been discussed a few thousand times.......

swingline · Mar 7, 2004

I would go with either of Dave's first two choices. You will make *more* power with the AFR/Edel/FTI combo but the Trickflow kit cuts out a lot of the guess work since it comes with everything you need to bolt it on and the parts were made to work together. It really comes down to how much money and time you want/can spend.

flewthecoupe · Mar 8, 2004

stangin it said:
How about do a search this has only been discussed a few thousand times.......

And they call you Sherlock. Did you see my list? I was asking if for opinions and if anyone would do anything different.

stangin it · Mar 8, 2004

flewthecoupe said:
And they call you Sherlock. Did you see my list? I was asking if for opinions and if anyone would do anything different.

AFR 165's , FTI custom cam, Edelbrock rpm intake, 30lb injectors, 65mm TB, 80mm Pro-m, 255lph pump, Kirban afpr, long tube headers, 2.5 exhaust.

Rootus · Mar 8, 2004

stangin it said:
AFR 165's , FTI custom cam, Edelbrock rpm intake, 30lb injectors, 65mm TB, 80mm Pro-m, 255lph pump, Kirban afpr, long tube headers, 2.5 exhaust.

Are you suggesting this as an option? That's fascinating, given that in another thread you refer to AFR users as "dick lickers"...

stangin it said:
Every time theres a AFR/TFS/Edelbrock thread all the AFR dick lickers come out and ruin the thread saying how they are the best no matter what because they are the most expensive and blah blah all the same 'Kiss Me''Kiss Me''Kiss Me''Kiss Me'. If you want any real info then just do a search.

stangin it · Mar 8, 2004

Some of you are dick lickers but if i dont say AFR/FTI/RPM then il just have to hear you nuts come out and preach your AFR bull'Kiss Me''Kiss Me''Kiss Me''Kiss Me'. So i figured id do everyone a favor and just get it over with.

Steeda90GT · Mar 8, 2004

stangin it said:
How about do a search this has only been discussed a few thousand times.......

View attachment 526543

randomjoker · Mar 8, 2004

lmfao.

Hrmm I wanna look at trickflow kits now... any url?

jwalker · Mar 8, 2004

My COmbo makes 292 At the wheels.

Im sure I could get it to 300 HPpretty easily.

HoofnIt · Mar 8, 2004

I'm going with a Cobra intake-ported lower, 65mm tb, 80mm Pro-M, 24lb injectors, AFR 165s, 1.6 RR, Steeda 19 cam, ceramic shorty headers and Bassani X-pipe. I'm hoping to get close to 300 at the rear wheels and into the 12s.

GTJake · Mar 8, 2004

Steeda90GT said:
View attachment 526537

Jake

Wanting 300 rear wheel hp

flewthecoupe

New Member

67stang390

New Member

Car Nut

94Five0

Loose Colon

Rootus

Officially Addicted

flewthecoupe

New Member

Stump1000

New Member

flewthecoupe

New Member

94Blue302GT

Member

stangin it

swingline

New Member

flewthecoupe

New Member

stangin it

Rootus

Officially Addicted

stangin it

Steeda90GT

randomjoker

New Member

jwalker

HoofnIt

GTJake

Similar threads

Wanting 300 rear wheel hp

New Member

New Member

Loose Colon

Officially Addicted

New Member

New Member

New Member

Member

New Member

New Member

Officially Addicted

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency