• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

water in headlights?

  • Thread starter Thread starter jmd2914
  • Start date Start date Jan 7, 2006
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jan 7, 2006
#1
  • Jan 7, 2006
  • #1
alright theres alittle water in my headlights, how can i get the water and condensation out of them? oh and there is small square of metal that fell of the top inside of the headlight and its just down in the bottom now, how do i get that out too?
 
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Jan 7, 2006
#2
  • Jan 7, 2006
  • #2
You'll have to take the buckets out and empty them. Drill some very small holes on the underside of them so future water can drain out.
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jan 7, 2006
#3
  • Jan 7, 2006
  • #3
ok ill do that, but how do i get that metal piece out? its like a 2in by 2in square
 

bobcatv8

Member
Aug 25, 2004
141
1
16
Ocala,FL
Jan 7, 2006
#4
  • Jan 7, 2006
  • #4
That metal piece is part of the reflector assembly. The water got in there due to a bad seal. It might be time for new headlamps!
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 7, 2006
#5
  • Jan 7, 2006
  • #5
pull the bulb use a wet/dry vac and hope the piece of metal will fit through hole plus it will pull water out.oh ya by the way if there cloudy clean them with alunimum wheel polish did wonders for mine.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 7, 2006
#6
  • Jan 7, 2006
  • #6
You'll have to take the lights off and drain them out.... My aftermarket lights came with a drain tube attached to them in the upper corner of the lights. A drilled hole in the upper corner will work to vent out any water VAPOR the next time. A whole in the bottom will help to drain out liquid water also.
 

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
Jan 7, 2006
#7
  • Jan 7, 2006
  • #7
just get new ones with good seals...
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jan 7, 2006
#8
  • Jan 7, 2006
  • #8
i tried and the metal piece wont fit through the whole, so how much would it be for new headlights without the bulbs? cuz i just bought new sylvania silver starts.
 

RMODEL65

Member
Jul 6, 2005
313
1
18
brunswick ga
Jan 8, 2006
#9
  • Jan 8, 2006
  • #9
can get a complete set off ebay so all the lights will match for a round 100 stoch replacements
 
S

SamSnyder

New Member
Mar 30, 2005
196
0
0
Jan 8, 2006
#10
  • Jan 8, 2006
  • #10
Fix them or replace, or you can expect repeated bulb failures. I even had one explode in there because of excess moisture inside.
 

gt40_2003wes

I did sound a wee bit gay there.
Aug 14, 2005
461
2
48
ky
Jan 8, 2006
#11
  • Jan 8, 2006
  • #11
i got a set in decent shape from ebay for 30 bucks u can find a good deal sometimes just look for it.
 
9

93-331-29psi

Member
Jul 20, 2004
157
0
17
NE North Carolina
Jan 8, 2006
#12
  • Jan 8, 2006
  • #12
I have a set of used lamps, no backing plates or rubber seals that I will sell you for $30 plus shipping. They will need to be polished as someone mentioned earlier because they are cloudy.
 

bobcatv8

Member
Aug 25, 2004
141
1
16
Ocala,FL
Jan 8, 2006
#13
  • Jan 8, 2006
  • #13
If they are your original lamps I doubt they are worth saving. If you could get the lenses seperated from the reflector w/o cracking them {doubtful if they are 17 years old} you could fix the broken metal piece and then reseal them. PITA however! Then you would have cloudy, brittle 17 y.o. repaired lamps. Other than a crack the only place moisture can get in is the bulb o-ring or the lens to reflector seal.
Get new ones. You won't believe how much it will improve the looks of your car!
 
J

jmd2914

Founding Member
Sep 6, 2002
937
0
0
Napa, California
Jan 9, 2006
#14
  • Jan 9, 2006
  • #14
i already bought new ones w/ clear corners. they are the ones that are foggy. any suggestions other than buying new ones?
 

bobcatv8

Member
Aug 25, 2004
141
1
16
Ocala,FL
Jan 9, 2006
#15
  • Jan 9, 2006
  • #15
Yup, I had exactly the same problem with my off-shore ultra clear diamond cut lamps. The reflector never fell off but right after installation the LH fogged up. I was able to {since they were new} slice & gouge out the half-azzed glue they used to seal the lens to the reflector. I pulled them apart, scraped out all the original glue and resealed them with GE clear silicone. Clamped it together, let it dry overnight, reinstalled the next day. No leaks since then over a year ago. The RH side started the same thing about 2 weeks ago. Same procedure, no leaks/fogging since I did the same to it.
The Chinese lamps just don't have the quality to last like OEM Ford lamps do but if you want any style other than stock looking lamps, this is what you may have to put up with!
 
You must log in or register to reply here.

Similar threads

2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
2
Interior and Upholstery Water leak, passenger side, ripped seats and carpet out already.
  • 2000ElectricGreen
  • Mar 18, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
311
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
squeak93
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
334
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
848
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
coil pack bracket
  • SteveG94GT
  • Apr 11, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
184
SN95 V6 Mustang Tech Apr 11, 2026
SteveG94GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?