I removed my door panels so I could paint them and found that there was water damage on the backside of the panels and also there was no water shield between the panel and the door.
I assume a previous owner removed the water shields. Where can I get new ones? I looked on 50resto.com but no dice
I assume a previous owner removed the water shields. Where can I get new ones? I looked on 50resto.com but no dice
bloopbloob
Member
From the factory, it's kind of like wax paper. The easiest thing to do would be to cut a piece of garbage bag into the general shape and get a roll of butyl tape to hold it on.
where could i find that tape! i need some for my tail light lenses but dont know where to get it!
3M caulk strips also work really well for holding the water shield in place - I used it on my '68.
I guess I'll just get a thick sheet of plastic drop cloth and cut to fit.
I guess I'll just get a thick sheet of plastic drop cloth and cut to fit.
mike0227
Member
SuperStang83
Founding Member
Yeah just make your own, or roll your windows up when it rains.
Unfortunately that won't work because the water that gets past the rubber seal and into the door is what causes the damage. When the window is up, there's nothing between the water and the inside of the door panel if the water shield is missing.
Similar threads
- Replies
- 4
- Views
- 177
- Replies
- 0
- Views
- 119
- Replies
- 0
- Views
- 82
- Replies
- 10
- Views
- 570
Electrical
2001 GT Overcharging
- Replies
- 1
- Views
- 220