Welder needed in Phoenix area

voipguy

Member

Mar 31, 2005

0

0

6

Chandler, AZ

Sep 20, 2005

#1

• Sep 20, 2005

• #1

Hey All~

I'm looking for someone to replace the driver and passenger side front floor pans (ahead of the seats) in my '65!
1) I don't know how-to weld.
2) I simply don't have the time right now to learn. Busy at work! Although I would like too someday soon!

So if anyone knows a reputable shop or individual in the sorrounding area I would greatly appreciate the advice!!

Thanks!

 

Dark Knight

Founding Member

Feb 1, 2000

2,578

0

0

Chandler, Az.

Sep 20, 2005

#2

• Sep 20, 2005

• #2

might try http://www.themustangshopaz.com

Gary out at www.southwestcustomtrucks.com could do it too, but they're pretty well booked up for awhile..

do you have the pans cut out already?

 

voipguy

Member

Mar 31, 2005

0

0

6

Chandler, AZ

Sep 21, 2005

#3

• Sep 21, 2005

• #3

Hey Dark Knight! Thanks for the reply!

I did check out the Mustang Shop, but they seemed a little high on the quote. I was told it would be at least $500-600 per side. I talked to a buddy back in IL that is in the autobody business for over 20 years and he suggested I shop around.
I called MuscleCar Garage and they told me about a fab shop near them, but I can't remember the name right now. I'm gonna try and check it out this week.
No, the pans aren't cut out yet. Right now I simply have the interior completely stripped. Just need this completed before I can start putting it back together.
Couple pics I took of the floors last night, plus a few other pics that I had already. Work in progress! But what project isn't! hahaha
http://photos.yahoo.com/chadr_11

 

G

gjz30075

Member

Aug 30, 2004

250

0

17

Roswell, Ga

Sep 21, 2005

#4

• Sep 21, 2005

• #4

Remember, you get what you pay for. If you're looking to just having to paint the floors when they are done, that's a fair quote. Its a lot of work to get them to that state.

 

Dark Knight

Founding Member

Feb 1, 2000

2,578

0

0

Chandler, Az.

Sep 21, 2005

#5

• Sep 21, 2005

• #5

might try travis over at http://www.autobody-innovations.com/ too...


might try www.1320stangs.com too.. someone there might be able to help

 

2bav8

Founding Member

Nov 30, 1998

2,511

1

47

Mesa, AZ

Sep 21, 2005

#6

• Sep 21, 2005

• #6

Might want to give Dan at AMWEST Vintage Auto a call. (602) 437-4864

He's off 40th St. and Broadway.

 

G

gzminiz

New Member

Oct 15, 2004

200

0

0

Phoenix, AZ

Sep 21, 2005

#7

• Sep 21, 2005

• #7

I believe Dan is also the president of the Copper State Mustang club, so he should at least be able to point you to someone.

 

voipguy

Member

Mar 31, 2005

0

0

6

Chandler, AZ

Sep 21, 2005

#8

• Sep 21, 2005

• #8

Thanks everyone for the information!!!! I do appreciate the advice.
I'm gonna be out of town all next week working in Louisville, KY. so I'll follow-up once I get back.