Well, I started my project...

[VibrantRedGT]

Ok, I'm going to do this.

 

[95snoozer]

driving around town... everything seemed to work fine last night

 

[Dave95GT]

The TFI module is under you air filter. Unbolt the two 5/16 screws and bolt up in the inner fender. You can use the existing pre-tapped thread holes in the fender. Bascially you just flip it around.

This wont work if you have the fender liners in. I just went thru this last night.

 

[VibrantRedGT]

This wont work if you have the fender liners in. I just went thru this last night.

Correct, my liners and fenders are off the car right now due to hiding wires and stuff.

 

[Dave95GT]

Correct, my liners and fenders are off the car right now due to hiding wires and stuff.

Same here. I put the fender liners in the other day to test fit them and that TFI module was in the way. I just unbolted it and moved it towards the front of the car. Now the fender liner fits no problem.

 

[95strokerPSU]

I know this thread is really old, and i don't know if 95snoozer still posts on this forum, but I'm just wondering if this worked as a long term solution and also if we could get the pics reloaded or new ones taken.