well i went and did it....

#6
i can't wait to go to the track with it installed i run a 14.4 now i'm hope the 90 hse. power shot will put me into the mid 13s what do yall think... also the video was auesome was'nt it.......where are you at hoodstripe....oh i see you in my rear view mirror....lol.
 
#7
nice job bill...the torque you gain from the n20 will have you addicted in minutes.....well worth it..just get it dyno and make sure everything (a/f) i son point
 
#10
lxwants12's said:
yea the 90 will do ya justice but ya might as wel go 100....dont forget the colder plugs...high octane and drop timing 4 degreees.....
Click to expand...
will do thanks, the only thing i didnt like about the kit is it comes with a 50,90&125 hrse.pwr. shot but i can but a 100 hrse.pwr. shot for about $25 unless someone here wants to trade a 125 for a 100...
 
#11
Nitrous is fun! My car on the 75 shot felt awesome, I haven't squeezed yet with the TW heads but I'm sure it will feel great.

Depending where you live you might want to look into a bottle heater, safety blow down tube and a purge kit. Good luck
 
#12
depending on mileage and condition of your car...you could run the 125 but i wouldnt till ya starp it on the dyno and see how things are...just got mine dynoed tday and i learned alot...
 
#13
lxwants12's said:
depending on mileage and condition of your car...you could run the 125 but i wouldnt till ya starp it on the dyno and see how things are...just got mine dynoed tday and i learned alot...
Click to expand...
i'm going to tune it on the dyno after install and run the 90 jet and the kit comes with a safety blow down tube and a purge kit and bottle pressure guage $542.50 worth new i got it for $335.00 and the tech i talked to at compucar told me it had a lifetime warranty and to contact him if i have any problems i'll see how it goes next week when i install it. i also got the MSD RPM ACTIVATED WINDOW SWITCH and the MSD RPM Module kit 3000 & 5000 series. i need a bottle warmer but that will be later it gets hot this time of year in alabama..and thanks for the info fellow stangnetters....
 
#14
yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside
 
#15
yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside
 
#16
lxwants12's said:
yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside
Click to expand...

:lol: Ok why not just put a torch to the bottle :D Just get a heater and be done with it.
 
#17
well i seen he was budget hunting....so thats y i suggested that...kinda sucks whn you think about it....most people say 500 bucks for nitrous....when actually if you do ir proper and get the accessories it will come to over a thousand...then when you realize it costs you 50 bucks to fill it.........after 20 fills and the kit.....you had enough to buy a base vortech blower....so i suggested some way for him to heat it up and save money...
 
#18
lxwants12's said:
well i seen he was budget hunting....so thats y i suggested that...kinda sucks whn you think about it....most people say 500 bucks for nitrous....when actually if you do ir proper and get the accessories it will come to over a thousand...then when you realize it costs you 50 bucks to fill it.........after 20 fills and the kit.....you had enough to buy a base vortech blower....so i suggested some way for him to heat it up and save money...
Click to expand...

Sorry, I didn't mean to sound like an ass, your idea will and does work. I just feel a heater is a lot better and a very good addition to any nitrous kit.

You are right, a lot of people think nitrous is a very cheap mod, but once you start getting serious with the gas all the liitle bells and whistles sure do add up. With all the extras on my kit and all the times I have filled up, I could of had a Vortech a long time ago.
 
#20
NAAAAAAAAAAAAWZZZZZZZZZZ!!! :nice: Rock on man! Sorry I've been dealing with life lately :fuss: http://forums.stangnet.com/showthread.php?p=6132051#post6132051

:uzi: life
:flame: morons


Sweet. I need to buy a bottle but there is so much I need to do to the notch now. I can't wait to see that (your car) bad boy in action!!!

I gotta go get the fiberglass hood I just took off the 89 glassed. The pin holes from the other car I took it off of are right where the AIRBAG SENSORS are on my 93... aaaaaaaahhhhhhggggggg :fuss:

Oh well... I'll bungi chord the freakin' thing if I have to in the mean time :nice:
 
You must log in or register to reply here.

Similar threads

pbroenen
  • Locked
1970 Mustang Mach 1 M-Code California Blue Plate 63K Miles Rebuilt Drivetrain
Replies
0
Views
2K
Classic Mustangs For Sale
pbroenen
pbroenen
Jaden
  • Locked
For Sale: Saleen VI Supercharger
Replies
0
Views
2K
Engine and Power Adder
Jaden
Jaden
I
My fuel pump went out today...is this the right focus one?
Replies
3
Views
741
1996 - 2004 SN95 Mustang -General/Talk-
SRT Handz
SRT Handz
R
Hard clutch pedal
Replies
2
Views
1K
Classic Mustang Specific Tech
65wildstang
65wildstang
R
King Cobra Clutch and 289 flywheel
Replies
13
Views
5K
Classic Mustang Specific Tech
jcode68
jcode68
Top Bottom
Back
Forums
Menu