well i went and did it....

bill302 · May 5, 2006

i watched the video in this thread by Speeds8erM-1 http://forums.stangnet.com/showthread.php?t=634359 auesome and look what i bought lookout hoodstripe see ya at the track....
http://cgi.ebay.com/ebaymotors/ws/e...sopZ1QQsacatZ6000QQsamcmZ6000QQsaspiZ2QQfviZ1
http://cgi.ebay.com/ebaymotors/ws/e...sopZ1QQsacatZ6000QQsamcmZ6000QQsaspiZ2QQfviZ1

Roland69 · May 5, 2006

dayym

P.S did you ship out the gear on Monday

DeVus1 · May 5, 2006

Oh snape. Nitrous is a great, and cheap, power adder. Should pick up some good time in the 1320.

Jaswir · May 5, 2006

i only want a nitrious because of the purge,,,,

bill302 · May 5, 2006

Roland69 said:
dayym

P.S did you ship out the gear on Monday

yes you should get it soon let me know when you recieve it....thanks

bill302 · May 5, 2006

i can't wait to go to the track with it installed i run a 14.4 now i'm hope the 90 hse. power shot will put me into the mid 13s what do yall think... also the video was auesome was'nt it.......where are you at hoodstripe....oh i see you in my rear view mirror....lol.

lxwants12's · May 5, 2006

nice job bill...the torque you gain from the n20 will have you addicted in minutes.....well worth it..just get it dyno and make sure everything (a/f) i son point

lxwants12's · May 5, 2006

yea the 90 will do ya justice but ya might as wel go 100....dont forget the colder plugs...high octane and drop timing 4 degreees.....

Roland69 · May 5, 2006

Jaswir said:
i only want a nitrious because of the purge,,,,

I don't care who you are that right there's funny.........co2's cheap and it will have the same effect

bill302 · May 5, 2006

lxwants12's said:
yea the 90 will do ya justice but ya might as wel go 100....dont forget the colder plugs...high octane and drop timing 4 degreees.....

will do thanks, the only thing i didnt like about the kit is it comes with a 50,90&125 hrse.pwr. shot but i can but a 100 hrse.pwr. shot for about $25 unless someone here wants to trade a 125 for a 100...

Curse · May 5, 2006

Nitrous is fun! My car on the 75 shot felt awesome, I haven't squeezed yet with the TW heads but I'm sure it will feel great.

Depending where you live you might want to look into a bottle heater, safety blow down tube and a purge kit. Good luck

lxwants12's · May 5, 2006

depending on mileage and condition of your car...you could run the 125 but i wouldnt till ya starp it on the dyno and see how things are...just got mine dynoed tday and i learned alot...

bill302 · May 5, 2006

lxwants12's said:
depending on mileage and condition of your car...you could run the 125 but i wouldnt till ya starp it on the dyno and see how things are...just got mine dynoed tday and i learned alot...

i'm going to tune it on the dyno after install and run the 90 jet and the kit comes with a safety blow down tube and a purge kit and bottle pressure guage $542.50 worth new i got it for $335.00 and the tech i talked to at compucar told me it had a lifetime warranty and to contact him if i have any problems i'll see how it goes next week when i install it. i also got the MSD RPM ACTIVATED WINDOW SWITCH and the MSD RPM Module kit 3000 & 5000 series. i need a bottle warmer but that will be later it gets hot this time of year in alabama..and thanks for the info fellow stangnetters....

lxwants12's · May 5, 2006

yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside

lxwants12's · May 5, 2006

yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside

Curse · May 6, 2006

lxwants12's said:
yea and you dont need a warmer...a nice trick grn92lx taught me was put it in the tube under hot watr for about 5 minutes..then wrap that bitch up in foil...pressure will stay between 800 and 1100 for at least 4 hours....my experience....and also assuming it will be at least like 85* outside

Ok why not just put a torch to the bottle Just get a heater and be done with it.

lxwants12's · May 6, 2006

well i seen he was budget hunting....so thats y i suggested that...kinda sucks whn you think about it....most people say 500 bucks for nitrous....when actually if you do ir proper and get the accessories it will come to over a thousand...then when you realize it costs you 50 bucks to fill it.........after 20 fills and the kit.....you had enough to buy a base vortech blower....so i suggested some way for him to heat it up and save money...

Curse · May 6, 2006

lxwants12's said:
well i seen he was budget hunting....so thats y i suggested that...kinda sucks whn you think about it....most people say 500 bucks for nitrous....when actually if you do ir proper and get the accessories it will come to over a thousand...then when you realize it costs you 50 bucks to fill it.........after 20 fills and the kit.....you had enough to buy a base vortech blower....so i suggested some way for him to heat it up and save money...

Sorry, I didn't mean to sound like an ass, your idea will and does work. I just feel a heater is a lot better and a very good addition to any nitrous kit.

You are right, a lot of people think nitrous is a very cheap mod, but once you start getting serious with the gas all the liitle bells and whistles sure do add up. With all the extras on my kit and all the times I have filled up, I could of had a Vortech a long time ago.

Roland69 · May 6, 2006

what about a warming pad (the ones for you back or whatever) and have a small power inverter mounted in the trunk to plug it into.

Strype · May 8, 2006

NAAAAAAAAAAAAWZZZZZZZZZZ!!! Rock on man! Sorry I've been dealing with life lately http://forums.stangnet.com/showthread.php?p=6132051#post6132051

life
morons

Sweet. I need to buy a bottle but there is so much I need to do to the notch now. I can't wait to see that (your car) bad boy in action!!!

I gotta go get the fiberglass hood I just took off the 89 glassed. The pin holes from the other car I took it off of are right where the AIRBAG SENSORS are on my 93... aaaaaaaahhhhhhggggggg

Oh well... I'll bungi chord the freakin' thing if I have to in the mean time

well i went and did it....

Active Member

Sergeant Tangnet

Member

Active Member

Active Member

New Member

New Member

Sergeant Tangnet

Active Member

Member

New Member

Active Member

New Member

New Member

Member

New Member

Member

Sergeant Tangnet

Cuthbert catcher

Similar threads

Privacy & Transparency

Privacy & Transparency