• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Well I'm dumb

  • Thread starter Thread starter mustangsally93
  • Start date Start date Apr 5, 2006

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Apr 5, 2006
#1
  • Apr 5, 2006
  • #1
So I put my engine all back in the car. We started doing the timing, but it wouldn't start. So we tryed everything, but not thing would work. So last saturday we droped the pony off at a shop to have them fix it. Well I called them today, they said they didn't call because they didn't have my number( but I gave it to them) The shop told me they took of the water pump and all the other stuff. Guess what I did. I put it on 3 teeth off. Well I'm a dumb Shyt. 300 dollars later and I get my pony back....
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Apr 5, 2006
#2
  • Apr 5, 2006
  • #2
The other thing I want to know if this could have done any thing to the engine??
 
S

skip nay

New Member
Apr 15, 2005
110
0
0
Chambersburg Pa
Apr 5, 2006
#3
  • Apr 5, 2006
  • #3
I would say probably not unless you heard something.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 5, 2006
#4
  • Apr 5, 2006
  • #4
Exactly what was it that was 3 teeth off?
 
T

tylerrocks

New Member
Oct 13, 2005
514
0
0
Big Spring, TX
Apr 5, 2006
#5
  • Apr 5, 2006
  • #5
vristang said:
Exactly what was it that was 3 teeth off?
Click to expand...

Timing chain gears?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Apr 5, 2006
#6
  • Apr 5, 2006
  • #6
Distributor.

Technically there is no such thing as being a tooth off. It's just that you can't physically spin the dizzy 360 degrees. If you could you could just stab it wherever you wanted and spin it til the timing was correct.

But since you only have a small range of adjustment (about 90 degrees) you have to stab it somewhere so the rotor will align somewhere in that range
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 5, 2006
#7
  • Apr 5, 2006
  • #7

Unless they did something else while they had the front half of the motor apart, be ready to get the car back with the same problem.

jason
 
You must log in or register to reply here.

Similar threads

S
Drivetrain Decode this Tremec tag?
  • Scott_S
  • Jul 25, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
194
Fox 5.0 Mustang Tech Jul 25, 2026
Noobz347
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
520
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
D
sad day
  • davecobra2
  • Jul 13, 2026
  • What is it Worth?!?!?
Replies
2
Views
312
What is it Worth?!?!? Jul 22, 2026
davecobra2
D
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
896
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
Engine Code 41 again
  • Creomod
  • Jul 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
864
Fox 5.0 Mustang Tech Jul 11, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?