Went to replace gt badges on the side, but, we have a paint problem...

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Mar 22, 2006

#1

• Mar 22, 2006

• #1

So i got the running ponies to replace my GT badges on the side, however, after taking off the GT badges, there is a very noticeable outline from the badge, and what looks like some leftover goo or dirt around the outline that didnt come off with goo gone. So i tried a clay bar, and that didnt help. Upon further inspection, it looks like there is a thing layer of clear stuff (i'm guessing this is clear coat) around the badge. i did get into an accident which required a new hood and front bumper and they told me they had to respray the undamaged front quarter panels too, which they said was to "blend in" the paint. Its almost as if they sprayed them without the emblems, put the emblems back on and then clear coated them. Or even just left the emblems on and resprayed. If you look close, it looks like the GT outline is indented in the paint.

OH, i replaced the GT Badge on the back too and did not have this problem, so which makes me think it was the respray on the quarter panels that is presenting the problems.

Any help? I put the GT badge back on for now, but would really like to use the horse badges!!

EDIT:// posted pix

 

S

Silvr04GT

Founding Member

Feb 4, 2002

1,131

0

37

San Jose, CA

Mar 22, 2006

#2

• Mar 22, 2006

• #2

Maybe get your fender re-clearcoated?

 

MineralMan

Active Member

May 17, 2005

146

76

38

San Diego, CA

Mar 22, 2006

#3

• Mar 22, 2006

• #3

When they blend the tops of the fenders to the hood, they will need to reclearcoat to get everything nice and smooth on your fenders. Sounds like they either didn't re clear the entire fender and got overspray of the clear on the GT badge, or they reinstalled the badge before the clear was dry.

You would wetsand out the clear coat ridge... but not many want to take on that undertaking.

 

BlackenedSVT

Active Member

Jan 18, 2004

1,841

7

38

New Jersey

Mar 22, 2006

#4

• Mar 22, 2006

• #4

Get a badge thats the same size as the GT emblem to cover it up?

 

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Mar 22, 2006

#5

• Mar 22, 2006

• #5

This was what i was afraid of... You think any polishing compounds would make it better?

 

DropTopPony

Noob Slayer

Founding Member

Aug 13, 2002

2,570

3

48

south jersey

Mar 22, 2006

#6

• Mar 22, 2006

• #6

I had this on mine also...original paint etc...my new badge was larger then the old so i had no issue. It was like they cleared it with the badge on

 

S

Silvr04GT

Founding Member

Feb 4, 2002

1,131

0

37

San Jose, CA

Mar 22, 2006

#7

• Mar 22, 2006

• #7

Well you first would need to wet sand it then polish it out with a polishing compound.

I think if I were you I'd be headed over to a local body shop! Just ask them to take a look and see what they recommend.

 

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Mar 22, 2006

#8

• Mar 22, 2006

• #8

seems like too much trouble for some badges...

 

K

Kilgore Trout

Fried or Broiled ?

10 Year Member

Mar 30, 2005

4,749

95

134

Mar 22, 2006

#9

• Mar 22, 2006

• #9

Take it to a body shop for an estimate.

 

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Apr 18, 2006

#10

• Apr 18, 2006

• #10

BUmp, posted some pix

 

mineralgray2002

New Member

Dec 4, 2005

33

2

0

Centralia, Illinois

Apr 18, 2006

#11

• Apr 18, 2006

• #11

sorta sounds like they just taped off the badge, which will leave more clear where they sprayed and the regular level of clear below, causing a ridge. Damn bodyshops that dont take their time and do it right.

 

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Apr 18, 2006

#12

• Apr 18, 2006

• #12

mineralgray2002 said:

sorta sounds like they just taped off the badge, which will leave more clear where they sprayed and the regular level of clear below, causing a ridge. Damn bodyshops that dont take their time and do it right.

Click to expand...

Yeah... it was a ford shop...

Right, so we've summed up the problem... HOW DO I FIX IT?

Some have suggested wet sanding... You think if i wet sanded the ridge down, what grit would i use? You think a porter cable random orbital buffer and some polishing compounds would take the swirls off after the sanding?

 

32v

My CT sucks Donkey Balls.

Founding Member

Dec 9, 2001

3,487

1

68

North Cuba

Apr 18, 2006

#13

• Apr 18, 2006

• #13

Old school BigChiefSmokem, you should have kept your Farley avatar.

 

BigChiefSmokem

Founding Member

Feb 20, 2002

1,400

0

36

Jacksonville, FL

Apr 18, 2006

#14

• Apr 18, 2006

• #14

32v said:

Old school BigChiefSmokem, you should have kept your Farley avatar.

Click to expand...

HOly crap people actually remember me here! Yeah, ever since I left that avatar for a new one, its never felt right...

 

Dope 97GT

New Member

Jul 16, 2005

439

0

0

Rochester, NY (SUNY Brockport)

Apr 18, 2006

#15

• Apr 18, 2006

• #15

Use like a 2000 grit wet sand paper and wet sand it with soapy water and then get a polishing compound and polish it up with a buffer.

Also a body shop should do it for cheap. Like $50 at the most unless you know them.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,944

224

Massachusetts

Apr 18, 2006

#16

• Apr 18, 2006

• #16

Same think happened with my car when i took the GT emblems and put V6 running ponys on.

1 side was fine, but the other side had an outline of the emblem in the clearcoat like a depression.

Unless it happened at the factory or before being put on the lot i dunno how it would happen cuz it's never been hit.

It doesn't show with silver and after some time it has sort of "blended" together. I'm sure a body shop could take it down easily with a buffer or some polish

 

Brute03

Member

Mar 20, 2006

232

0

16

Apr 18, 2006

#17

• Apr 18, 2006

• #17

that should even right out if you wet sand it or buff it with some fine rubbing compound

 

DTNODYA

Member

Dec 15, 2005

831

1

16

Apr 19, 2006

#18

• Apr 19, 2006

• #18

2000 grit, lots of water, wetsand lightly. If you have a porter cable buffer then use it with 3M polishing compound. That stuff is the best I have used. You might not even need to wetsand if it is relatively smooth.

 

todd4566

Founding Member

May 24, 2000

1,075

0

36

California

Apr 19, 2006

#19

• Apr 19, 2006

• #19

That exact thing happened to me when I decided to put on "281" emblems on the side of my Gt. Since I had the front end repainted, taking the GT badge off resulted in the same outline shown in your pictures (never be using that bodyshop again!). I ended up just putting the GT emblems back on since a repaint was my only option.

 

X

xmikevankuikenx

New Member

Oct 16, 2005

29

0

1

Apr 19, 2006

#20

• Apr 19, 2006

• #20

It's easier just to take the emblem off. I don't know why anyone would want to tape it. If it was taped and cleared over, you can't simply wetsand/buff it. It will still have an outline where the new clear meets old no matter how smooth you get it.