went to track, help me out with my problems

93slowlx5.0 · Jul 3, 2004

hey i went to the race track lastnight and ran 14.009 at 99.87mph it has massive wheel hop i cant do a burnout because the rear will start hopping what suspension mods should i do before i build my stroker motor? and which axles should i get for the rear so i dont break them?

car is a 93lx 5.0l 5spd
mods include

bbk cold air intake
bbk h-pipe, 2.5in flowmaster exhaust
3.73 posi rear, fms flywheel, fms racing clutch
frame connectors, and BFG drag radials

ironmedic · Jul 3, 2004

your 8.8 should hold up fine from what i understand.
i recommend either SSM lift bars or some lower and upper control arms. get some eibach drag launch springs and lakewood shocks and struts. unhooking the front sway bar is popular and probably losing some front end weight would be good too. i just dumped my A/C and smog pump and running a short belt. soon im going to relocate my battery, change the radiator, and do an e-fan.

went to track, help me out with my problems

93slowlx5.0

New Member

ironmedic

New Member

Similar threads

went to track, help me out with my problems

93slowlx5.0

New Member

ironmedic

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency