• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What about these heads?

  • Thread starter Thread starter 311-420
  • Start date Start date Oct 10, 2005

311-420

New Member
Oct 5, 2005
14
0
0
Big Tex
Oct 10, 2005
#1
  • Oct 10, 2005
  • #1
Im considering aluminum gt-40X turbo swirls for my '94 Steeda. what do yall think? good, or bad experiences? they are on ebay brand new and assembled for $995. lemme know before i order them. thanks
 
B

blackice

New Member
Sep 23, 2005
17
0
0
CT
Oct 10, 2005
#2
  • Oct 10, 2005
  • #2
I think you can find them cheaper if you shop around.
 

stock 92 gt

New Member
Mar 30, 2005
165
0
0
Oct 10, 2005
#3
  • Oct 10, 2005
  • #3
http://www.jegs.com/webapp/wcs/stor...goryId=25595&parentCategoryId=11253&langId=-1
 

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Oct 10, 2005
#4
  • Oct 10, 2005
  • #4
stock 92 gt said:
http://www.jegs.com/webapp/wcs/stor...goryId=25595&parentCategoryId=11253&langId=-1
Click to expand...

thats only for 1, the above mentioned is for 2 i believe
 
F

frcefedlx

New Member
Dec 6, 2004
184
0
0
Oct 10, 2005
#5
  • Oct 10, 2005
  • #5
That seams like a decent price. They are a better flowing head than the aluminum GT 40 (y303 i think), thats been on the forums alot for like $800. For a little more you could get some TFS or AFR's. I dont hear to many complaints on either of these and I like my Twisted wedges.
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Oct 10, 2005
#6
  • Oct 10, 2005
  • #6
i got the y303's for 750 shipped.. they are the same thing as the x's but the x's are prted a little bit. they are great heads for the money. but i would have gone AFR's if the cash was there. but im getting my cobra intake and y303's ported, so they will be just as good as alot of stuff out there.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 10, 2005
#7
  • Oct 10, 2005
  • #7
I paid less that that for my TFS's. I think you could find them cheaper.
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Oct 10, 2005
#8
  • Oct 10, 2005
  • #8
90mustangGT said:
I paid less that that for my TFS's. I think you could find them cheaper.
Click to expand...

i was in a bind, i needed heads, and i needed them at that time. those were the cheapest alum. heads new that i could find.. and DAMMIT why do you have to sell that MAF Inj. combo for so cheap! i bout new 24 lbd inj, for 215$ and i dont even have a MAF... o well live and learn.
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Oct 11, 2005
#9
  • Oct 11, 2005
  • #9
they are in my 05' PAW cat. for $524, the y303's...PB
 
T

Topdowncruise

New Member
Apr 7, 2005
207
0
0
Canada
Oct 11, 2005
#10
  • Oct 11, 2005
  • #10
I bought my Take off y303's for $670 for the pair then spent $325 to port them.I spent another $25 to get before and after flow reports.So after all that about the same price as X303's and they flow as well as(out of the box/unported) X303's.The guys at Ford Racing suggested the ported y's might be better for my street only use because the Y's ports are smaller which they said was better for low end torque.Of course,if you are after all out performance and cost is not a factor a lot of people here go with AFR165's.
 
T

Topdowncruise

New Member
Apr 7, 2005
207
0
0
Canada
Oct 11, 2005
#11
  • Oct 11, 2005
  • #11
pb_paulie_b said:
they are in my 05' PAW cat. for $524, the y303's...PB
Click to expand...
I think you meant to say $524 each.
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Oct 11, 2005
#12
  • Oct 11, 2005
  • #12
I got my Ys for 850 shipped fully ported and o-ringed, if you have some time to be patient, do it. FRPP heads are decent in stock form, but fully ported they're wicked. Look what thumper has been doing with E7s, and stock they're crap. Keep looking, you might find some nice ported aluminum heads for under a G
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Oct 12, 2005
#13
  • Oct 12, 2005
  • #13
Topdowncruise said:
I think you meant to say $524 each.
Click to expand...
$524 a pair. unless it's a typo. it says there on overstock speacial...PB
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Oct 12, 2005
#14
  • Oct 12, 2005
  • #14
The X is good all around head. I'm not sure about the price but it sounds reasonable.
 
H

Highbredcloud

Active Member
Mar 4, 2003
1,075
1
36
Palos Hills, IL
Oct 12, 2005
#15
  • Oct 12, 2005
  • #15
X heads are good heads...as stated above once ported on the exhaust side they are wicked...but really so is every head...the downfall is the price...they are pricey...I made 297/314 RWHP/RWTQ with those heads and a GT-40 intake...FTI cam...on a stock bottome end 302...I also busted a head gasket a week later just by driving to church...so I'm curious if at they dyno I was getting full compression...the price seems right...I say do it...hard to beat factory products.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Heads and how to buy
  • Dontknowchit
  • Aug 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
28
Views
2K
Fox 5.0 Mustang Tech Aug 24, 2025
Noobz347
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
597
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
R
Progress Thread 351w stroker rotating assembly and build
  • Ric4eyedFox
  • Mar 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 24, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?