what all is inside the pumpkin

[Torinalth]

i have some horrid noise inside the pumpkin and am thinking of just tearing everything out and replacing it. i know the differential will be replaced with an eaton posi, ring and pinion (3.73), getting the pinion seal, and the connector from the driveshaft to the pinion that ataches to the other side of the U joint, and thinking axles just to be safe. is there anything else i need? oh, also getting the BBK girdle so i can get the drain and fill plugs

is there anything else i need to get to replace everything inside?

Torinalth

 

[Stang35]

Just make sure you change the blinker fluid

 

[artificial HP]

I'd get the master install kit for the ring and pinion. That way you dont have to nickel and dime all the pieces like the crush sleeve, etc....

 

[Torinalth]

does FRPP sell the blinker fluid?

i'll look into the master kit, i think stangsuspension.com sells that kit. aside from the kit, differential, ring/pinion, and axles is there anything else inside the casing that would need replacing?

Torinalth

 

[9646gt]

Just make sure you change the blinker fluid

 

[MT1083]

Depending on your mileage you might want to replace axle bearings and seals while your in there.

 

[Torinalth]

ahhh good, more items to add to the growing list.... acutally.... if i go with 31 spline axles, i will hvae to do this anyhow, right? but i'll add axle bearings and seals to the list.

Torinalth

 

[cougar694u]

ahhh good, more items to add to the growing list.... if i go with 31 spline axles, i will hvae to do this anyhow, right?

I don't believe so, I think only the spline area of the axle is thicker, and not stepped as much as 28's. It's good to change the anyway.

You may want to change the pneumatic fluid, though

 

[MT1083]

The axle bearings don't HAVE to be changed, but I just changed mine while I was in there for peace of mind.

 

[twogts4us]

what all is inside the pumpkin

seeds and a bunch of mucky orange crap