• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

what bogarts?

  • Thread starter Thread starter autumn_again
  • Start date Start date Jan 25, 2009
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 25, 2009
#1
  • Jan 25, 2009
  • #1
tomorrow morning i'm ordering bogart 15x10 rears.

i was gunna just get the 15x8 jegs, but for tire options i like the 10 inch alot better.

and i planned on going forced induction down the road, so i have more tire options then too.

i'm inbetween



D-10s



bolted R/Ts



welded R/Ts.


here are my fronts.


i'm leaning towards the R/T series preferably the bolted, but i love the d-10s, just not sure mix and match.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 26, 2009
#2
  • Jan 26, 2009
  • #2
ordered the bolted r/ts, with 325/50/15 mickey thompsons street radial. its a big tire, but i am not going to drop the pressure that much at the track, and i figure i need to heat the tires less.

the mickey thompsons are expected 2/4. the bogarts they said about 4 days.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 26, 2009
#3
  • Jan 26, 2009
  • #3
How much did you pay? Good choice in wheel though.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 26, 2009
#4
  • Jan 26, 2009
  • #4
450 a wheel

but i don't wanna have to buy wheels multiple times. i wanna do it right the first time.

these are the tires i got size and everything

View attachment 274935


should hook in dirt. hah.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 26, 2009
#5
  • Jan 26, 2009
  • #5
Bogarts are the ish though. I really like both ET Streets and the ET Streets II.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 26, 2009
#6
  • Jan 26, 2009
  • #6
hell yeah. i was gunna go d10s incase i ever go bogart skinnies, but eff it. i'm young. i'm sure on one car i'll own in my life i'll have a set on there.

i was gunna go M&H, but from what i've read their tires run skinny.

and the one thing i missed from my old car was the big fat tire out back. a 315. now i'm running an even bigger tire, so that should satisfy me hah.
 

kooldawg6

mine works really well and can take a fair amount
Aug 31, 2006
1,679
2
38
Central VA
Jan 27, 2009
#7
  • Jan 27, 2009
  • #7
For track only wheels, I wouldn't mix and match. My MTs took quite a bit of burning out to heat up properly. Granted mine is the auto with stock converter so the RPMs were dropping faster than I wanted/needed them to. I'd say it was about four burnouts before the tires were sticky to the touch after a pass. I like the RTs.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 27, 2009
#8
  • Jan 27, 2009
  • #8
i'll be using them street and strip.

i've heard alot of the bogarts in the front are bending, cracking etc. but no problems with the rears.

the roads around here arent too bad either. i know where to avoid haha.

if i was gunna go with just track only wheels i probably would of just went with a slick on a 15x8.

do you have a line lock on your car kool?

i am hoping i am still able to heat the tires starting in second with these big meaty things. i have no problem turning the 235/55/17s into melted rubber in second.


from what i've read i will probably get a year out of these tires. which is fine to me for a good tire.


i was suprised when he told me about 4 days till the wheels are finished. i am unsure on lug nuts though. he says that hes not sure if they come with them, and everything i've read they do. i need to order the sway bar relocation tonight.

everything i've read on bogarts is like 2 weeks wait. but everytime i've talked to stage3 they've told me 4 days.

and the mickey thompsons are on backorder, but now on my summit order it says friday instead of wens the 4th. so thats even better.
 
B

blackgt460

Active Member
Jun 3, 2003
109
21
28
South East Pennsylvania
Jan 27, 2009
#9
  • Jan 27, 2009
  • #9
Autumn, do you have stock studs? If so are they going to work with the new Bogarts? If so I am going to try to sneak a set of Bogarts all the way around this year before my kid is born, lol. Let me know if you dont mind and be sure to post pics as we have the same color car I'd like to see the r/t mounted.

Bob
 

kooldawg6

mine works really well and can take a fair amount
Aug 31, 2006
1,679
2
38
Central VA
Jan 27, 2009
#10
  • Jan 27, 2009
  • #10
I don't have line locks on my car.
I've heard that Bogarts are not recommended for street driving. I imagine it is because they are only designed for straight line and not able to handle much cornering load.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 27, 2009
#11
  • Jan 27, 2009
  • #11
kooldawg6 said:
I don't have line locks on my car.
I've heard that Bogarts are not recommended for street driving. I imagine it is because they are only designed for straight line and not able to handle much cornering load.
Click to expand...

yeah. so far i've only seen issues with the fronts though. so i'm just running the rear bogarts.

i just gotta be cautious. and black gt460. no problem i'll post pictures as soon as i get them. from what i've read, the roush bogarts that youcan get on ebay for like 699 a pair, need longer studs because of how they are designed with the spacer welded to them. all the other bogarts are designed differently where you can use the stock studs. you want lugs like these.



you need the rear sway bar relocation bracket also. about 38 bucks. i am going to order that for now because i need subframe connectors, but eventually get the xtreme anti roll bar when i have the cash.

 

Attachments

  • sum-7540103_w.webp
    8.7 KB · Views: 157
B

blackgt460

Active Member
Jun 3, 2003
109
21
28
South East Pennsylvania
Jan 28, 2009
#12
  • Jan 28, 2009
  • #12
Autumn, I found 15x8 bogarts w/5.5 backspace for 405 ea. I know most people are unaccepting of the 15x8 compared to 15x10 but for someone like me with a mild car with no huge plans any time soon and no workspace to do the sway bar relocation kit it is a direct bolt on for me. I think I could grab those with some 275/60 MT's and be good to go, you think?
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 28, 2009
#13
  • Jan 28, 2009
  • #13
blackgt460 said:
Autumn, I found 15x8 bogarts w/5.5 backspace for 405 ea. I know most people are unaccepting of the 15x8 compared to 15x10 but for someone like me with a mild car with no huge plans any time soon and no workspace to do the sway bar relocation kit it is a direct bolt on for me. I think I could grab those with some 275/60 MT's and be good to go, you think?
Click to expand...

i'd say go with the 15x8 jegs. like 120 a piece. direct bolt on. think its 5.5 backspacing.

275/60 is a 28 inch tall tire. so if you dont have any big big plans you could probably get away with a 275/50.

Bolt On Performance Parts For Your S197 Mustang - Muscle Mustangs & Fast Fords Magazine they used a 26 inch tall tire here and from what i remember reading they didn't have any problems.
 
B

blackgt460

Active Member
Jun 3, 2003
109
21
28
South East Pennsylvania
Jan 28, 2009
#14
  • Jan 28, 2009
  • #14
Yea your right a 50 would be better. The only thing about the Jegs wheels are I think the center caps look a little funny...is that me or did I just see some bad angles, they look a little big and stick out far.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 28, 2009
#15
  • Jan 28, 2009
  • #15
blackgt460 said:
Yea your right a 50 would be better. The only thing about the Jegs wheels are I think the center caps look a little funny...is that me or did I just see some bad angles, they look a little big and stick out far.
Click to expand...

yeah they arent the prettiest. i'm actually taking my jegs center caps off. i don't want a nice bogart center cap in the rear and then 89$ jegs logos up front haha.

when i get the bogarts i'm gunna try the bogart center cap in my jegs. if they fit, theres the solution. hah.



the 50 will be a little shorter then the stock wheel, but it'll hook a million times better.
 
B

blackgt460

Active Member
Jun 3, 2003
109
21
28
South East Pennsylvania
Jan 28, 2009
#16
  • Jan 28, 2009
  • #16
I wonder if WELD center caps would fit. Jegs sells a 4 pack so maybe I'll look into it.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 28, 2009
#17
  • Jan 28, 2009
  • #17
blackgt460 said:
I wonder if WELD center caps would fit. Jegs sells a 4 pack so maybe I'll look into it.
Click to expand...

i could tell you if they fit saturday. my brother has a set of weld drag lights going on his[my old] 94 mustang GT. car is sick. 306 DSS forged short block. edelbrock heads, v3 supercharger. long tubes custom side pipes. PMS computer etc.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Jan 30, 2009
#18
  • Jan 30, 2009
  • #18
got my lugnuts and my sway bar relocation bracket today. wheels i am going to call stage 3 today about them to see whats going on with them, and the tires they are expecting 2/3 i believe at summit

which kinda sucks because they said expecting today. but oh well.
 

autumn_again

New Member
Oct 2, 2007
356
0
0
Hamilton, NJ
Feb 2, 2009
#19
  • Feb 2, 2009
  • #19
so i got home from my first day of work at my new job, and log on to see if summit has replied to my email. they told me mickey thompson is really screwy with the estimated dates for their tires. so i sent an email back tonight after thinking about it, and asked if they could send me the nittos in that size.

they are the same price, same size, a little more streetable, and last longer. i shall get a message back from them tomorrow hopefully. but i don't see any problem with them substituting for it, since under the mickey thompsons it says substitute for = and it lists the nitto 555rs in 325/50/15.

i plan on calling stage 3 tomorrow when i get home from work, since i get home around 5 eastern time which is about 3 in their time, so they should be open. they told me about 4 days.

the way its looking i may be rollin' on bogarts this week. woo!

for now i'll just play with my lugnuts.
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Feb 2, 2009
#20
  • Feb 2, 2009
  • #20
Nittos generally run a little smaller than MTs.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
H
New kid on the block
  • HydraX
  • Mar 22, 2025
  • The Welcome Wagon
Replies
17
Views
1K
The Welcome Wagon Mar 22, 2025
HydraX
H
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
21K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Cpp mini sub install
  • 67coupestang
  • Sep 13, 2021
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
7
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Sep 18, 2021
wicked93gs
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?