What can you stroke a 4.6L GT engine to??

DHGBullitt4.6 said:

hey greekstang the highest you can stroke a 281 is 310. Trust me on that one, I pretty much know everything. Later.

Click to expand...

Oh noooooooooo! He is back again with a different name! Now I feel better because he "knows everything"...

edit: New name but looks to me with the same attititude!

el_kid_1 said:

Oh noooooooooo! He is back again with a different name! Now I feel better because he "knows everything"...

edit: New name but looks to me with the same attititude!

Click to expand...

Check this out.

http://forums.stangnet.com/showpost.php?p=3610511&postcount=89

Can't you bore and srtoke a 4.6 and it end up with a 323 or something around there

DHGBullitt4.6 said:

hey greekstang the highest you can stroke a 281 is 310. Trust me on that one, I pretty much know everything. Later.

Click to expand...

You shouldn't ever say that you know everything

[QUOTE='96&'01Stang]Can't you bore and srtoke a 4.6 and it end up with a 323 or something around there[/QUOTE]
yes..bore and stroke a 4.6, you will get 324CI (5.3L). Lot of engine builders start selling those stroked/forges package short blocks. VTEngines for example...

yeah, but i still think that reliably, 310 is as far as id go

stallion98gt said:

yes..bore and stroke a 4.6, you will get 324CI (5.3L). Lot of engine builders start selling those stroked/forges package short blocks. VTEngines for example...

Click to expand...

I knew it was a 5.3L just was unsure of the CI

if I remember you have to use an aluminium block and have some new sleeves in order to get to that 324CI...someone will confirm...from what VT engines said ur around 380 rwhp N/A with a set of stage 2 Pi heads...then slap a KB S/C...insane....

stallion98gt said:

if I remember you have to use an aluminium block and have some new sleeves in order to get to that 324CI...someone will confirm...from what VT engines said ur around 380 rwhp N/A with a set of stage 2 Pi heads...then slap a KB S/C...insane....

Click to expand...

Don't quote me on this but I am almost positive that a certain shop in GA already has a motor exactly like that in progress

[QUOTE='96&'01Stang]Don't quote me on this but I am almost positive that a certain shop in GA already has a motor exactly like that in progress[/QUOTE]
oh yeah I'm sure..several shops are doing the same products... ...good for us

yay!

stallion98gt said:

oh yeah I'm sure..several shops are doing the same products... ...good for us

Click to expand...

I mean someone working with VT engines building a 5.3 stroker with low compression and putting a KB on top....It is going to be insane. VT engines is getting around 400 TQ N/A with there stroker motor....then you put a KB on top of that with high boost

It's not a 324, it's just a little ol' 302. Add that to the KB blower and the results should be enjoyable.