What do you think, car mods?

snack1pack · Jul 24, 2007

Well what do you guys think about this mod list that I will be getting over the next few months, and any input or suggestions on any alterations that need be done.?

b cam, trickflow intake, 36# injectors, 80mm maf, 70mm tb, 1.6 rockers, lifters, push rods, valvespings/retainers, Novi 1200 or S trim Vortech, tune and chip at CRT, 4:10 gears, M/T drag

Mr. Rustypwnz · Jul 24, 2007

traction, get at least a ecam, a bcam dosent do very well for boost, an Fcam works better than both of them, if you want to do the fms cam thing.

blackened88lx · Jul 25, 2007

/\ What he said. But, is this for the car that you're selling?

snack1pack · Jul 25, 2007

If it does not get sold, this is what I am going to do to it. Instead of getting a trickflow intake/70mm tb, im getting a real 93 cobra intake with real 65mm tb, all new sensors, egr space, and egr for 200, so I don't think I can pass that up

Busted07 · Jul 25, 2007

snack1pack said:
Well what do you guys think about this mod list that I will be getting over the next few months, and any input or suggestions on any alterations that need be done.?

b cam, trickflow intake, 36# injectors, 80mm maf, 70mm tb, 1.6 rockers, lifters, push rods, valvespings/retainers, Novi 1200 or S trim Vortech, tune and chip at CRT, 4:10 gears, M/T drag

Dont settle for an alphabet cam man, you wont get the full potential out of it. spend a few extra bucks, and get a custom grind to match your setup.

At least thats what i would do if i was in your shoes to maximize your combo.

snack1pack · Jul 25, 2007

Well my plan was to build this motor up with all that right now, while i save for a dss block, forged internals, and a good set of heads, then get a custom cam, and swap over the blower/intake.

ninety15.0 · Jul 26, 2007

Thats not a bad idea...i see where you are coming from. I wouldnt spend the money for a custom cam at this time either. If you are rocking the stock heads, to be honest with you i would stick with the stock cam! Stock cam with a cobra intake, TB, MAF, and rockers will work out quite nicely with a blower.

snack1pack · Jul 26, 2007

Well at the moment my car does have an E cam in it, I just wanted something a little more aggressive sounding

Busted07 · Jul 26, 2007

snack1pack said:
Well my plan was to build this motor up with all that right now, while i save for a dss block, forged internals, and a good set of heads, then get a custom cam, and swap over the blower/intake.

I can understand that then man...

snack1pack · Jul 26, 2007

Do you think a cobra intake mani and 65mm tb would be good enough air for this application tho

Foxfan88 · Jul 26, 2007

snack1pack said:
Well at the moment my car does have an E cam in it, I just wanted something a little more aggressive sounding

wouldnt you rather have a less agressive sounding car that ran faster or a meaner sounding idle but be smoked by every car on the road. this is an exaggeration but the sound at idle shouldnt be what your looking for.

snack1pack · Jul 26, 2007

Well i am looking for performance, but the f cam does sound pretty nice, and i dont see why it would hurt putting an f cam in there

blackened88lx · Jul 26, 2007

snack1pack said:
Well my plan was to build this motor up with all that right now, while i save for a dss block, forged internals, and a good set of heads, then get a custom cam, and swap over the blower/intake.

A dss block is the same as a stock block. It already has forged pistons, and the stock rotating assembly is stronger than the block. Save your money on that stuff unless you're going for a good aftermarket block like Dart or Boss.

bentley429 · Jul 26, 2007

Yep alphabet cams are junk and wont make power....

Aliate X · Jul 26, 2007

bentley429 said:
Yep alphabet cams are junk and wont make power....

The f-cam is definitally not junk as far as boosted cars go, go on turbomustangs and look at what 70% of people run as far as a cam goes, its a great boost cam

blackened88lx · Jul 26, 2007

Aliate X said:
The f-cam is definitally not junk as far as boosted cars go, go on turbomustangs and look at what 70% of people run as far as a cam goes, its a great boost cam

Haha. Look at his sig...

Foxfan88 · Jul 27, 2007

i wouldnt call the alphabet cams junk, yes they are old designs and dont make the best power but they are proven performers. if they were junk like people say they are, we wouldnt have people still using them today.

with the alphabet cams you KNOW what your going to get. i run a b-cam and it works pretty good. is there more power in a different cam or custom? yeah but my car is pretty much a street car and i am not looking for every ounce of power.

not to mention you can grab ABC cams for dirt cheap nowadays

bentley429 · Jul 27, 2007

It was a joke look at my sig.....I think its working fine.

Aliate X · Jul 27, 2007

bentley429 said:
It was a joke look at my sig.....I think its working fine.

lol didnt notice.

Other than the F-cam Id never put an alphabet cam in my car unless someone paid me to.

What do you think, car mods?

snack1pack

New Member

Mr. Rustypwnz

Advanced Member

blackened88lx

Active Member

snack1pack

New Member

Busted07

I need my gorilla to be about an inch longer.

snack1pack

New Member

ninety15.0

New Member

snack1pack

New Member

Busted07

I need my gorilla to be about an inch longer.

snack1pack

New Member

Foxfan88

My Grandpa has great wood.

snack1pack

New Member

blackened88lx

Active Member

bentley429

Banned

Aliate X

Member

blackened88lx

Active Member

Foxfan88

My Grandpa has great wood.

bentley429

Banned

Aliate X

Member

Similar threads

What do you think, car mods?

New Member

Advanced Member

Active Member

New Member

I need my gorilla to be about an inch longer.

New Member

New Member

New Member

I need my gorilla to be about an inch longer.

New Member

My Grandpa has great wood.

New Member

Active Member

Banned

Member

Active Member

My Grandpa has great wood.

Banned

Member

Similar threads

Privacy & Transparency

Privacy & Transparency