• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

What do you think my buddies car will run *rant*

  • Thread starter Thread starter SLiM JiM 156
  • Start date Start date Apr 26, 2004

SLiM JiM 156

Founding Member
Mar 18, 2002
1,024
0
36
Rohnert Park, CA
Apr 26, 2004
#1
  • Apr 26, 2004
  • #1
Ok well me and my buddy got into an arguement over what his car will do at the track. We would just take it to the track and settle this but he has shaved door handles and no cage, so we have to bench race. lol. his mods are

D.S.S Low Comp. 306
Procharger D1 @ 16 lbs of boost
AFR 185 Heads
Custom Blower grind cam (dont know specs)
42 lb injectors
BBK 70mm T/B
SVO intake
3.55 gears
Pro 5.0 shifter
BBK Longtubes
o/r shorty x pipe
He would be running on ET Streets
lowering springs etc etc..

Well what do you guys think he would pull at the track so we can put this to rest..

thanks
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Apr 26, 2004
#2
  • Apr 26, 2004
  • #2
Wow as long as he drives hard and revvs it out i would imagine a low 11second slip, either way it doesnt matter because he is gonna get kicked out on his first pass if he hooks up and drives it at all well.
 

Mustangless

Member
Jun 27, 2003
903
1
18
home
Apr 26, 2004
#3
  • Apr 26, 2004
  • #3
WhiteDevil said:
Wow as long as he drives hard and revvs it out i would imagine a low 11second slip, either way it doesnt matter because he is gonna get kicked out on his first pass if he hooks up and drives it at all well.
Click to expand...

I would say low 11s to if not in the 10s. But I dont know that much
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Apr 26, 2004
#4
  • Apr 26, 2004
  • #4
man, what is the argument does he say it is so fast that he'll run a certain number or what. Or do you think it is faster than he does or something. I say go make the one pass you can get and then leave the track but at least you would know


jason
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Apr 26, 2004
#5
  • Apr 26, 2004
  • #5
With that blower cam in it, it would run high 11's on motor. It's got a mid to high 10 if he launches the car aggressively and he can drive.

Joe
 

SLiM JiM 156

Founding Member
Mar 18, 2002
1,024
0
36
Rohnert Park, CA
Apr 26, 2004
#6
  • Apr 26, 2004
  • #6
I tell him that it will pull off a low 11, really high 10, he tells me that it will pull mid-low 10, regardless its a badass car. The only problem is that the tech inspectors will notice that the car will be in the 11's plus he wont pass inspection with the shaved door handles. the handles were on the car when he bought it and he is trying to get new doors.
 

swingline

New Member
Sep 18, 2003
1,252
0
0
TCB - Taking Care of Business
Apr 26, 2004
#7
  • Apr 26, 2004
  • #7
What year is it?
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Apr 26, 2004
#8
  • Apr 26, 2004
  • #8
i didn't realize that that illegal, but i guess if you had an accident, they couldn't get into you. i would say if he knows how to drive/launch, prolly be in the low 11s to high 10s. it takes a decent suspension to get into the 10s.
 

AznStanger3v

Active Member
Aug 11, 2003
2,026
0
47
Northern VA
Apr 26, 2004
#9
  • Apr 26, 2004
  • #9
i would say low 11s, but if he got slicks, definently 10s. i envy both of your cars
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
Apr 26, 2004
#10
  • Apr 26, 2004
  • #10
I would say if he could drive maybe a high 10. I doubt that it will be in the low 10s.
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Apr 26, 2004
#11
  • Apr 26, 2004
  • #11
I'd bet money that he won't see 10's. The power should be there to run that number, but I don't see him doing it in a car that he hasn't run at the strip yet. I say mid 11's at 125mph.
 

89 blue lx

Founding Member
Nov 18, 2001
1,936
0
37
FSU in tallahassee GO SEMINOLES!
Apr 26, 2004
#12
  • Apr 26, 2004
  • #12
out of curiosity what is done to your car?
 

VIPERn94Five-0

Founding Member
Apr 28, 2002
3,352
2
58
Poughkeepsie, NY
Apr 26, 2004
#13
  • Apr 26, 2004
  • #13
im with Paul....especially when a car gets up around those kinds of power numbers its gonna take some skill and practice to get the most out of it....


Anthony
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Apr 26, 2004
#14
  • Apr 26, 2004
  • #14
i'm with paul, there is no way in hell the first time down the track with that car he'll pull off a 10 sec slip. i'd say he'll get more than one run down the track, because the first few will be dogs with the unknown layout of the track but i'd venture to say mid-high 11's before he gets kicked out.
look at pauls times, what was your first run with your now low 12 sec combo....mid 13's????

Jeremy
 

SLiM JiM 156

Founding Member
Mar 18, 2002
1,024
0
36
Rohnert Park, CA
Apr 27, 2004
#15
  • Apr 27, 2004
  • #15
89 blue lx said:
out of curiosity what is done to your car?
Click to expand...

its a stock longblock non pi headed 4.6 w/ a V-1 S-Trim, 3.73 gears, o/r x pipe, flows, hurst shifter, 42 lb injectors, lightning mass air, steeda timing adjuster. I just got it all on running but now its all coming off because im going back to the 5.0 and selling the 4.6. heres a pic of my car though



Im picking up an 87 LX that was converted to mass air w/ all the boltons + a Procharger P600B in the box for $5000. I should have fun with that
 

SLiM JiM 156

Founding Member
Mar 18, 2002
1,024
0
36
Rohnert Park, CA
Apr 27, 2004
#16
  • Apr 27, 2004
  • #16
ProKiller said:
i didn't realize that that illegal, but i guess if you had an accident, they couldn't get into you. i would say if he knows how to drive/launch, prolly be in the low 11s to high 10s. it takes a decent suspension to get into the 10s.
Click to expand...

he does have suspension work done to the car, i just dont know exactly what he has so i didnt want to post it. I got some video of the car earlier today so if i figure how to post the vid ill post it up
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
Apr 27, 2004
#17
  • Apr 27, 2004
  • #17
DARK-5.0 said:
look at pauls times, what was your first run with your now low 12 sec combo....mid 13's????

Jeremy
Click to expand...

First trip to the track with my present combo resulted in a whopping.... 13.6 at 103!!!
 
You must log in or register to reply here.

Similar threads

  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
517
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
A
Engine 1990 Fox wont rev over 3500 RPMS
  • alex.sweitzer
  • Oct 27, 2020
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
57
Views
14K
Fox 5.0 Mustang Tech Mar 21, 2021
alex.sweitzer
A
M
Progress Thread Monkeybutt2000's 89 vert build thread- 408w build in progress
  • Monkeybutt2000
  • Apr 4, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
437
Views
68K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 20, 2026
2Blue2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?