• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

What does it take to run with the 03/04 cobra

  • Thread starter Thread starter red ink
  • Start date Start date Jan 25, 2006

red ink

Founding Member
Apr 8, 2002
746
1
0
Arizona
Jan 25, 2006
#1
  • Jan 25, 2006
  • #1
On the freeway more specifically...
will a vortech/H/C/I car run with one on the freeway? I've seen lots of vids of 5.0 cars that will run with them from a dig, but KB cobras hall ass. What should i look for to be able to run with one from a 100mph start?
 
D

DaveB

Founding Member
Jul 13, 2002
637
0
0
Middlesex and Pomona, NJ
Jan 25, 2006
#2
  • Jan 25, 2006
  • #2
A well matched h/c/i combo with a blower should work well. Turbo would be better, but thats a lot more expensive. Either way, a lot of money.
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Jan 25, 2006
#3
  • Jan 25, 2006
  • #3
any combo that can achieve good low 12, high 11 second passes with a good all around torque curve and good top end power. Good luck

Jeremy
 

rio95

Member
Nov 18, 2003
829
1
17
Grand Rapids, MI
Jan 25, 2006
#4
  • Jan 25, 2006
  • #4
A HCI blown 5.0 will hang with a STOCK 03/04, but a kenne bell 03/04 would walk all over a decent HCI blown 5.0. Think about it, a kenne bell 03/04 usually puts down around 625 to the wheels and a typical HCI blown 5.0 puts down around 425 to the wheels. That is quite a difference. A positive displacement blower will also rap them in the lower rpms.


I would say that a light 500 rwhp turbo 5.0 would be a good match with an kenne bell 03/04. I'll let you know in a few weeks.
 

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Jan 25, 2006
#5
  • Jan 25, 2006
  • #5
Stock they run about 112mph, so a HCI centri blower 5.0 should be well into the 116 mph range. From a highway roll I'd say unless the Cobra has a KB, the Eaton gets hot pretty quickly once above 100mph and the power curve falls off a bit once it gets warm.

Also, who really cares about highway? The 03's are heavy so they need alot of power to be fast, so a typical HCI 5.0 runs high 12's which is as fast as a stock 03 coupe.
 

red ink

Founding Member
Apr 8, 2002
746
1
0
Arizona
Jan 25, 2006
#6
  • Jan 25, 2006
  • #6
Joe 5.0 said:
Stock they run about 112mph, so a HCI centri blower 5.0 should be well into the 116 mph range. From a highway roll I'd say unless the Cobra has a KB, the Eaton gets hot pretty quickly once above 100mph and the power curve falls off a bit once it gets warm.

Also, who really cares about highway? The 03's are heavy so they need alot of power to be fast, so a typical HCI 5.0 runs high 12's which is as fast as a stock 03 coupe.
Click to expand...
I care about the highway...When a Mercedes SLR pulls up next to me in my stang doin 80 when im on a date I dont wanna be embarrassed
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 25, 2006
#7
  • Jan 25, 2006
  • #7
red ink said:
I care about the highway...When a Mercedes SLR pulls up next to me in my stang doin 80 when im on a date I dont wanna be embarrassed
Click to expand...

i hear ya man, i loooooove racin on the highway. first off your gonna need a diff tranny--or at least a diff 5th gear. second if you plan on racing for a good little distance then i would recommend a turbo or a cog drive setup, some meth injection and maybe a 50 shot.

last but most important you need to have balls of billet titanium as a highway race usually is not about power but how fast the other guy is willing to push it.

i would also like to add that we of the different breed do not bash you drag racers, so please leave the "who cares about the highway" comments in your head.


seriously man, if you ever run into an SLR anywhere--you should take pictures and not try to race it.
 

Rootus

Officially Addicted
Feb 8, 2003
6,659
1
0
Portland, Oregon
Jan 25, 2006
#8
  • Jan 25, 2006
  • #8
Joe 5.0 said:
The 03's are heavy so they need alot of power to be fast, so a typical HCI 5.0 runs high 12's which is as fast as a stock 03 coupe.
Click to expand...
Fortunately they make power easily enough that it really doesn't matter that they're a fat heavy pig. They weigh about 350 lbs more than a 94/95 5.0, which is about 10% ... and they make more than 10% more horsepower than an H/C/I 5.0 . When it was stock, my Cobra beat my 310 rwhp '95 by 0.3 sec and 3 mph. $500 later, it beat it by 1.1 sec and 12 mph .

To the original poster...

Figure you want something that traps 118+ mph, because that's where a pullied Cobra will be (and you have to assume they all have pullies, because at this point you'll be right more often than not). With the weight difference, I'd think that 425 rwhp should even it up nicely.

And ....

Do remember how embarassing it would be to kill innocent bystanders, perhaps your girlfriend, or yourself, when something goes wrong during the race you started with that SLR at 80 mph. Perhaps just admire the purty Caddy and leave the speed run as an exercise for your imagination .

Dave
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Jan 25, 2006
#9
  • Jan 25, 2006
  • #9
interesting thread. MOST stock 03s are going high 12s so a good H/C/I combo will put u right there. I know when i have been to the track i run right with stock 03s. Of course they do have the top end advantage if u want to win on the freeway u will need a blower.
 

94gts

Member
Jul 4, 2004
873
0
16
Carmel, New York
Jan 25, 2006
#10
  • Jan 25, 2006
  • #10
red ink said:
What should i look for to be able to run with one from a 100mph start?
Click to expand...


100mph start
 

warpd

Member
Dec 27, 2005
44
0
6
Auburn,AL
Jan 25, 2006
#11
  • Jan 25, 2006
  • #11
Threads like this depress me and make me wonder why I don't just stop saving for my stroker and start saving for an 03/04....
 

Joe 5.0

Founding Member
Feb 1, 2002
1,184
2
38
Macomb, MI (metro detroit)
Jan 26, 2006
#12
  • Jan 26, 2006
  • #12
Well but they are still $25k AT LEAST. $10k into a 94/95 GT will be faster than almost anything you'll encounter on the street.

Hell, a stock longblock s-trim'd 5 speed well driven 94/95GT will be as fast as a stock/relatively stock 03 cobra. Rememer that not everyone rides around on sticky tires (at 300+ rwhp you should be tho), so take advantage of that if you can. I have embaressed 03 Cobras in my car until I am midway through 2nd gear. 3700lbs + hard street tires + 420hp + IRS = crappy launch, for most drivers anyways. Just start the hazards at 40mph and you won! lol j/k

FWIW with some good driving, sticky tires, and a good tune and a couple more bolt-ons my car should (hopefully) be mid 12's. Thats with ALOT less invested thana buying a Cobra, and its paid off.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Jan 26, 2006
#13
  • Jan 26, 2006
  • #13
Joe 5.0 said:
3700lbs + hard street tires + 420hp + IRS = crappy launch, for most drivers anyways. Just start the hazards at 40mph and you won!
Click to expand...


seriously, though, someone mentioned somethign about quitting saving for his blower and getting an 03/04 instead. i've noticed that the 03/04 owners are pretty cocky. hell, a lot of people can throw down the money for a car that fast out of the box (+ the money for the smaller pulley and exhaust), but not very many guys can build a car to compete w/ it. imo, you'd get more respect by building your car up, putting some sweat and even some blood into it, and whooping on the pretty boy w/ the terminator. just something to consider...
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jan 26, 2006
#14
  • Jan 26, 2006
  • #14
i wanna beat enzo's
 

warpd

Member
Dec 27, 2005
44
0
6
Auburn,AL
Jan 26, 2006
#15
  • Jan 26, 2006
  • #15
Yea the problem is the power potential of 03/04 is alot more. Ok so lets say I built a car that can outrun a stock 03/04 now that same guy just bought a pulley and I will get my ass handed to me once again with my 4000 dollar motor. That will really piss me off. Maybe I should just go ahead and buy a dart block and build a 1000hp TT car..lol
 

red ink

Founding Member
Apr 8, 2002
746
1
0
Arizona
Jan 26, 2006
#16
  • Jan 26, 2006
  • #16
http://coasthigh.com/Assemblies/Crate_Motors/427_injected_venom.htm
I think this will do the trick. Or satisfy me for a little while....
13 grand tho...
On a side note..I had an SLR cruise past me on the freeway about a week ago. Anyone know how they get it to be emissions legal with the exhaust coming right out the front fender? Seems like there would be no room for cats? That thing sounded so sick tho
 
D

db1994

New Member
Nov 17, 2004
52
0
0
Lake Worth, FL
Jan 26, 2006
#17
  • Jan 26, 2006
  • #17
Around here its an escalation of power. One person gets a ported 04 cobra, then someone does turbo to beat him, then someone else does a dart block turbo, then dart block 427 stroker twin turbos. It never ends really.

No matter what you do, someone somewhere will likely pull along side you and hand you your ass at some point in time.

-Jason
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Jan 26, 2006
#18
  • Jan 26, 2006
  • #18
db1994 said:
No matter what you do, someone somewhere will likely pull along side you and hand you your ass at some point in time.

-Jason
Click to expand...
ay, something we all need to realize. don't bust your balls over trying to be the fastest.
 

Engel

Member
Apr 2, 2005
219
0
16
Currently Fort Walton Beach
Jan 26, 2006
#19
  • Jan 26, 2006
  • #19
lol when your crusing on the highway and you see an slr you a) cry or b) admire, somehow I dont think you will be able to match its est 208mph top speed in a mustang frame. And as for "pimp" status the thing cost a couple hundred grand and maybe a little more comfortable .

I love the 03 cobra. If I wasnt so impatient I would save up for one of those. The car is built for speed right out of the box, saves alot of work and time. Not to mention it handles well.
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Jan 26, 2006
#20
  • Jan 26, 2006
  • #20
Joe 5.0 said:
Rememer that not everyone rides around on sticky tires (at 300+ rwhp you should be tho), so take advantage of that if you can. I
Click to expand...
Hell yeah you should. I have given a couple 03 hard runs from lights i roll with 275/40/17 nitto drags thats what i ran the times in my sig with.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
260
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
826
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
334
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
117
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 7:13 PM
Qtrhrse23
Q
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
321
SVT Tech Forum Nov 20, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?