What else is needed?

[DarkMesa8]

I have access to a 2.3L turbo motor, turbo, all piping, and intercooler. I also have the turbo wiring harness and possibly the PCM.

What else will be needed to drop this setup into my 91LX?

Thanks.

 

[mr_woodster]

Forget the turbo wiring harness, Check out Stinger's site for the repining diagrams. He also has a walk through of how he did his.

Your car is a 91-93 mustang, meaning mass air/DIS...so the swap will be a little more involved, but very doable!

Is your car a manual?

 

[DarkMesa8]

Thanks for the reply!

Do you know of anything major that I'll need to purchase? Or is it just a whole bunch of wiring? Wiring doesn't worry me, expensive parts suddenly needed during the swap do.

 

[Stinger]

You'll need the air meter, coil, computer, and a few parts of the harness...if the harness isn't extra $$$ then grab it as well.

You'll also want to look into using the turbo flywheel and clutch if you have a 5 speed.

 

[DarkMesa8]

So the MAF and coil packs on the 91 won't work?

 

[Asha'man]

No.

Ash