hey all, i'm getting ready to reasamble the block i bought, i changed the cam(f303)
the heads are gt40 cast iron, i'm going to do some minor porting to them, my friend said that i should get thinner gaskets to bring my compresion up, what are my options ? i don't know if it matters but is going to be carb. and the bottom end is stock from a 94 or 95 gt with low miles, i changed all the bearings and had the crank polished and they also did the oil holes...
thanks for any help/info.
the heads are gt40 cast iron, i'm going to do some minor porting to them, my friend said that i should get thinner gaskets to bring my compresion up, what are my options ? i don't know if it matters but is going to be carb. and the bottom end is stock from a 94 or 95 gt with low miles, i changed all the bearings and had the crank polished and they also did the oil holes...
thanks for any help/info.